More items (36 items)

for connecting/extending data cables up to Cat.7A - IP67 protection due to special shrink tube - class E to ISO/IEC 11801 Ed.2.2:2011-06 is complied with in combination with Cat.6, Cat.6A, Cat.7 an...

surface-mounted, unequipped module housing for individual modules in modul design - solid steel sheet housing - upper part of the housing powder-coated in RAL 9010 - upper part of the housing can b...

Crimp Tool LSA-PLUS The crimp tool S (S for sensor) pushes a cable wire in a defined position into the LSA-PLUS insulation displacement connector and cuts the wire to length in the same step

plug housing with clamp lock acc. to ISO/IEC 24702 and IEC 61076-3-106 var. 5 - IP67 protected housing to hold Industry plug inserts - increased diameter range of 10 mm for connection of cable jack...

this cable sharing adapter allows simultaneous operation of two 4 wire services, here: 2 x telephone (ISDN), via an 8 wire installation line - pairwise use: one adapter at the wall outlet, one at t...

field plug Cat.6A with multiport capability suitable for 10 GBits as per IEEE 802.3an eight-core RJ45 plug (can be assembled in the field) for AWG 22 AWG 26/7-22/7, AWG 24/1-22/1 can be connected s...

high quality with GHMT PVP - qualified for 10 GBit Ethernet (IEEE 802.3an) - Class EA up to 500 MHz per ISO/IEC 11801:2008 Ed.2.1 - qualified for Power over Ethernet (PoE) - mounting friendly termi...

The SAR 1 is connected to a telecommunications line and controlled by the call voltage. The SAR 1 only reacts to the call voltage, not to dialing pulses (IWV). It activates an external signal emitt...

The SAR4 and SAR5 can be connected to a telecommunications access line or separate control voltage source (AC/DC) and are activated by the call voltage or control voltage. The SAR reacts either onl...

manually released locking to close unoccupied RJ45 jacks and protect them from dust - with grip