Roller Bearings (2,393 items)

The SKF spherical roller bearings have two rows of symmetrical rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis. The centre point of...

The SKF high-capacity cylindrical roller bearings combine the high load carrying capacity of a full complement bearing with the high speed capability of a bearing with cage. It has 70 mm ID and 125...

Single and double row axial cylindrical roller bearings are particularly suitable where: High axial and shock loads occur in one direction but no radial loads are presentThe load carrying capacity ...

SKF 50MM CYLINDRICAL ROLLER BEARING, WIT

SKF 50MM CYLINDRICAL ROLLER BEARING, SEA

The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point...

Inside Diameter = 45mm Outside Diameter = 100mm Roller Bearing Type = Cylindrical Race Width = 25mm Bore Type = Parallel

The SKF needle roller bearings are bearings with cylindrical rollers that are small in diameter relative to their length. It prevents stress peaks to extend bearing service life. It has 35 mm ID an...

Inside Diameter = 65mm Outside Diameter = 90mm Roller Bearing Type = Needle Race Width = 25mm Bore Type = Parallel

The SKF high-capacity cylindrical roller bearings combine the high load carrying capacity of a full complement bearing with the high speed capability of a bearing with cage. It has 55 mm ID and 120...

SKF 45MM CYLINDRICAL ROLLER BEARING, SEA

SKF 45MM CYLINDRICAL ROLLER BEARING, WIT

Inside Diameter = 35mm Outside Diameter = 47mm Roller Bearing Type = Needle Bore Type = Parallel

Double Row Full Complement Cylindrical Roller Bearings. INA from Schaeffler bearings have solid outer and inner rings and rib-guided cylindrical rollers. Since these bearings have the largest possi...

Bearing arrangements are subjected to particularly high radial loads Not only very high radial forces but also high axial loads from one direction must be supported by the bearing position (semi‑lo...