Roller Bearings (2,393 items)

High axial and shock loads occur in one direction but no radial loads are present The load carrying capacity of the corresponding axial deep groove ball bearings is no longer adequate (in this case...

The SKF roller bearing comes with a Metric type measurement system and Normal (Pn) tolerance group. The bearing has 55mm bore diameter, 80mm outside diameter and 45mm of width.Bearing steel bearing...

Needle roller bearings with ribs are single or double row units comprising machined outer rings with ribs, needle roller and cage assemblies and removable inner rings. Needle roller bearings with r...

Bearing arrangements are subjected to particularly high radial loads Not only very high radial forces but also high axial loads from one direction must be supported by the bearing position (semi‑lo...

Tapered Roller Bearings - TS (Tapered Single) Imperial/Metric. These bearings are the most basic and most widely used type of tapered roller bearings. They consist of two main separable parts, the ...

Inside Diameter = 23mm Outside Diameter = 52mm Roller Bearing Type = Taper Race Width = 15.73mm Bore Type = Tapered

Inside Diameter = 30mm Outside Diameter = 52mm Roller Bearing Type = Needle Race Width = 20mm Bore Type = Parallel

Tapered Roller Bearings - TS (Tapered Single) Imperial/Metric. These bearings are the most basic and most widely used type of tapered roller bearings. They consist of two main separable parts, the ...

Bearing arrangements are subjected to very high radial loads Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position (semi-locating or...

Inside Diameter = 50mm Outside Diameter = 80mm Roller Bearing Type = Taper Race Width = 24mm Bore Type = Tapered

Roller Bearings

Single and double row axial cylindrical roller bearings are particularly suitable where: High axial and shock loads occur in one direction but no radial loads are present The load carrying capacity...

Single row cylindrical roller bearings with cage are suitable where: Bearing arrangements are subjected to very high radial loads Not only high radial forces but also axial loads from one or both d...

Bearing arrangements are subjected to high and very high radial loads Relatively high axial loads occur on one or both sides, in addition to high radial forces Dynamic or static misalignments of th...

Inside Diameter = 25mm Outside Diameter = 62mm Roller Bearing Type = Cylindrical Race Width = 24mm Bore Type = Parallel