Roller Bearings (2,391 items)

Bearing arrangements are subjected to high and very high radial loads Relatively high axial loads occur on one or both sides, in addition to high radial forces Dynamic or static misalignments of th...

Bearing arrangements are subjected to very high radial loads Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position (semi-locating or...

Bearing arrangements are subjected to particularly high radial loads Not only very high radial forces but also high axial loads from one direction must be supported by the bearing position (semi‑lo...

Tapered roller bearings 303, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs

Single and double row axial cylindrical roller bearings are particularly suitable where: High axial and shock loads occur in one direction but no radial loads are presentThe load carrying capacity ...

The SKF spherical roller bearings have two rows of symmetrical rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis. The centre point of...

Inside Diameter = 25mm Outside Diameter = 62mm Roller Bearing Type = Cylindrical Race Width = 24mm Bore Type = Parallel

The SKF spherical roller bearings have two rows of symmetrical rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis. The centre point of...

The SKF spherical roller bearings have two rows of symmetrical rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis. The centre point of...

The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point...

The SKF high-capacity cylindrical roller bearings combine the high load carrying capacity of a full complement bearing with the high speed capability of a bearing with cage. It has 40 mm ID and 80 ...

The SKF Roller Bearings comes with Metric type measurement system and 0° nominal contact angle. This roller bearing comes with 32mm bore diameter, 47mm outside diameter and 22mm width.Cylindrical b...

Needle roller bearings with ribs are single or double row units comprising machined outer rings with ribs, needle roller and cage assemblies and removable inner rings. Needle roller bearings with r...

High radial loads occur High axial loads act on one side Combined loads must be supported (radial and axial forces acting simultaneously) Precise axial guidance of the shaft is required (locating b...

Tapered Roller Bearings - TS (Tapered Single) Imperial/Metric. These bearings are the most basic and most widely used type of tapered roller bearings. They consist of two main separable parts, the ...