The Stanley Intelli Tools FatMax® LED Voltage Tester uses an LED display to show the measured value immediately, polarity is also indicated. The durable body is IP54 rated, meaning it is resistant ...
The Multimetrix VT 12 phase tester is the ideal tool for non-contact phase detection. It includes an LED flashlight with high light intensity to ensure good visibility when measuring. The VT 12 is ...
EN 61243-3:2010. CSA, CE. Testo 750-1 voltage tester, batteries, measuring tip protector and measuring tip caps. Testo 750-1 Voltage Tester. Testo 750-1 has an LED display. The display is visible f...
The SEFRAM40 is an automatic, compact, reliable and robust voltage tester. It can measure voltages up to 690 V, with the following functions:AC voltage measurement DC voltage measurement Unipolar p...
C.A 745N tester, 1 set of black/red extra-fine CAT III / CAT IV test probes, 2 x 1.5 V AAA / LR3 alkaline batteries and 1 user manual in 5 languages. Chauvin Arnoux Voltage and Continuity Tester C....
Chauvin Arnoux Voltage and Continuity Tester with LEDs - TX0001-Z. Chauvin Arnoux TX0001-Z Voltage and continuity tester allow you to control AC and DC voltages. The Phase tracking system with audi...
CAT IV 600V, CAT III 690V, BS EN 61243-3 2010. VT25 Voltage Indicator, batteries and instructions. Martindale VT25 Voltage Indicator. The VT25 is a compact voltage tester which measures continuity,...
RS PRO RS-9230 Two-Pole Voltage Indicator and Continuity Tester Introducing the RS PRO RS-9230 Two-Pole Voltage Indicator and Continuity Tester, designed to deliver fast and accurate results when t...
EN 61326 Part 1, CAT IV 600 V / CAT III 1000 V. DUSPOL analog 1000 Voltage Tester. The DUSPOL analog 1000 voltage tester is rated for DC and AC voltage tests in a voltage range from 12 V to 1000 V....
CAT IV 600 V, CAT III 690 V. Users manual, GS 38 caps, 2 x 1.5V (AAA / IEC LR03) batteries (installed). 2100-Alpha Two Pole Voltage Tester. The Beha-Amprobe 2100-Alpha is rugged, easy to use two po...
Fluke T90 Basic Voltage and Continuity Tester The compact Fluke T90 Voltage and Continuity Tester gives you fast test results the way you need them in a slim design. Large, easy-to-use buttons, bri...
RS PRO RS-9331 Two-Pole Voltage Indicator and Continuity Tester Introducing the RS PRO RS-9331 Two-Pole Voltage Indicator and Continuity Tester, designed to deliver fast and accurate results when t...
EN 61326 Part 1, CAT IV 600 V / CAT III 1000 V. DUSPOL expert 1000 Voltage Tester. The DUSPOL expert 1000 voltage tester is rated for DC and AC voltage tests in a voltage range from 12 V to 1000 V....
The new SEFRAM 62 is an easy-to-use instrument. The SEFRAM 62 has been designed, tested and approved according to the EN61243-3 standard. Designed with IP2X test probes, the user will be protected ...
EN 61243-3 Ed.2009, EN 61243-3 Ed.2010, DIN VDE 0682-401 Ed.2011. Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead termi...
EN 61243-3:2010. CSA, CE. Testo 750-2 voltage tester, batteries, measuring tip protector and measuring tip caps. Testo 750-2 Voltage Tester. Testo 750-2 has an LED display. The display is visible f...
EN 61243-3 Ed.2009, EN 61243-3 Ed.2010, DIN VDE 0682-401 Ed.2011. Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead termi...
BS EN61243-3: 2010. Safety Voltage Indicator Without Fuse, VI13800. The Martindale VI13800 is identical to the Martindale VI3700 except that the VI3800 does not have a fuse. This is so that it comp...
Martindale Voltage TesterThe Martindale voltage tester measures voltage ranging between 12V and 690VAC/DC. It comes with AAA batteries and an instruction manual.Features and BenefitsLED indication ...
Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both m...
Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit. Carry case, right angled probe ...
Voltagetester with continuity measurement and phase sequence indication The Beha-Amprobe 2100-Alpha, 2100-Beta and 2100-Gamma are rugged and reliable two pole voltage testers for voltage and contin...
EN 61243-3:2010. CSA, CE. Testo 750-3 voltage tester, batteries, measuring tip protector and measuring tip caps. Testo 750-3 Voltage Tester. Testo 750-3 has an LED display. The display is visible f...
Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both m...
Fluke T110 Voltage, Continuity Tester with switchable load The Fluke T110 Voltage and Continuity Tester with electric torch, backlit LED indicator, clear audible and vibrating voltage indicator let...
Safety rule: determine zero voltage! The voltage and continuity tester from Wiha is your ideal daily companion to easily check this prerequisite of the safety rule and to support you with the vario...
EN 61326 Part 1, CAT IV 600 V / CAT III 1000 V. DUSPOL digital 1000 Voltage Tester. The DUSPOL digital 1000 voltage tester is rated for DC and AC voltage tests in a voltage range from 12 V to 1000 ...
CAT IV 600 V/CAT III 750 V. Batteries and manual. RS PRO IVT-10 LED Voltage Indicator. RS PRO IVT-10 two-pole voltage indicator and continuity tester is rugged and easy to use. Voltage indicators a...
Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit. Right angled probe tip, two str...
The Beha-Amprobe 2100-Alpha, 2100-Beta and 2100-Gamma are rugged and reliable two pole voltage testers for voltage and continuity checks. Built tough for use in industrial and commercial environmen...
Conforms to BS EN 61243-3:2010 CAT IV 1000V. VI-15000 Voltage Indicator, instructions. Martindale VI-15000 Voltage Indicator. The Martindale VI-15000 Voltage Indicator is an ideal instrument for en...
Maximum Voltage = 1000V ac/dc Safety Category = CAT IV 1000V Display Type = LED IP Rating = IP64 Power Source = From Unit Under Test Dimensions = 213 x 112 x 72mm Weight = 320g Height = 72mm Length...
Maximum Voltage = 1000V ac Continuity Check = Yes Safety Category = CAT IV Display Type = LCD, LED RCD Trip Test = Yes IP Rating = IP64 Battery Type = AAA, LR03 Power Source = Battery Dimensions = ...
CAT IV 600V, CAT III 1000V. Right angled probe tip, two straight tips and instructions. Drummond Test Lamp MTL20B. The MTL20B incorporates two test buttons, one on the body of the unit and one on t...
IEC 61243 and EN 50110-1, IEC 61010-2-031 Cat. III. MS917 voltage detector. Fully dedicated to safety, this voltage tester combines all the functions of a multicontroller. It can check AC and DC le...
EN 61243-3:2010, EN61010-1. TÜV, CSA ; CE. Testo current/voltage tester, batteries and measuring tips. 2. Testo 755 Voltage Tester. Testo 755 are the first current/voltmeter which meet the requirem...
CAT IV 600 V/CAT III 750 V safety standard. batteries and instruction manual. RS PRO IVT-20 Voltage Tester LCD. RS PRO IVT-20 two-pole voltage indicator and continuity testers are rugged and easy t...
PROFISAFE 690L Voltage and Continuity Tester. PROFISAFE 690L (M630J) Voltage and Continuity Tester in accordance with DIN EN 61243-3 / VDE 0682-401. Voltage test Phase test Polarity test Phase sequ...
2 x AAA batteries (1.5 V). MS-918-PG Voltage Multi-Tester. MS-918-PG is a voltage absence tester in accordance with EN 61243-3 (2010). In response to the requirements of the new standard NF C 18-51...
The Beha-Amprobe 2100-Delta Voltage Tester with Current-Function TRMS Safety rated up to CAT III 1000 V / CAT IV 600 V, the 2100-Delta is the ideal product for troubleshooting in industrial and com...
Fluke T130 Voltage and Continuity Tester with backlit LCD readout The Fluke T130 Voltage and Continuity Tester with large, easy-to-use buttons, a bright backlit LED indicator and LCD display, displ...
EN 61243-3:2010, EN61010-1. TÜV, CSA ; CE. Testo current/voltage tester, batteries and measuring tips. 2. Testo 755 Voltage Tester. Testo 755 are the first current/voltmeter which meet the requirem...
The Schneider Electric voltage presence indicator for Compact NSX 100/160/250. This accessory detects and indicates that circuit breaker terminals are supplied with power. It may be positioned upst...