Seeed (133 items)

Grove 103100124 Shield for Arduino Nano provides you a simple way to connect with Arduino Nano and also Seeeduino Nano. This shield pulls out the pins of the motherboard and expands to 8 Grove conn...

Grove Shield for Pi Pico v1.0 is an expansion board for Raspberry Pi Pico designed by Seeed Studio for the orderliness of your connected sensors when you develop projects with Pico. It provides fem...

Seeed 101020001 Grove - HCHO Sensor is a semiconductor VOC gas sensor. It uses the VOC sensor WSP2110 whose conductivity changes with the concentration of VOC gas in the air. With a circuit, the co...

From the Grove modular connector prototyping system is the Grove - Button . The momentary push button outputs a HIGH when pressed and a LOW when released.

Seeed 101020004 Grove - Switch(P) is to toggle the switch handle to make the circuit on or off, so as to achieve the purpose of switching the circuit. It features that flexible operation which give...

Seeed 101020006 Grove - Gas Sensor(MQ3) module is useful for gas leakage detecting (in home and industry). It can detect LPG, i-butane, methane, alcohol, hydrogen, and smoke. Measurements can be ta...

The Grove Moisture Sensor from Seeed Studio has two conductive prongs which can be pushed into soil or other substrate to measure the water content. It returns the moisture as an analogue signal, a...

The Grove Ultrasonic Range Finder from Seeed Studio emits ultrasonic pulses and times the return signal to establish the distance between the sensor and a reflective object. It can measure distance...

The Grove Temperature & Humidity Sensor from Seeed Studio is factory calibrated to ensure it functions well in your project.With and accuracy of ±2°C and ±5%RH this sensor is an easy choice for mos...

The Grove Dust Sensor from Seeed Studio measures the concentration of particles >= 1 µm in the air.

Seeed 101020013 Grove - RTC(DS1307) is based on the clock chip DS1307 and supports I2C communication. It uses a Lithium cell battery (CR1225) as it is low cost and very energy efficient. It can run...

From the Grove modular connector prototyping system is the Grove - Temperature Sensor. The sensor uses an onboard thermistor to measure ambient temperature over an operating range of -40 to 125°C, ...

Seeed 101020016 Grove - Infrared Receiver is used to receive infrared signals and remote control detection. The IR detector has a demodulator inside that looks for modulated IR at 38 kHz. The Infra...

Seeed 101020017 Grove - Rotary Angle Sensor or potentiometer is also known as a pot meter or Pot twig produces analog output between 0 and Vcc (5V DC with Seeeduino) on its D1 connector. The angula...

The Grove Water Sensor from Seeed Studio can be connected to a digital input to detect the presence of water or to an analogue input to measure the amount of water. Applications include tank overfl...

The Grove Temperature & Humidity Sensor from Seeed Studio is factory calibrated to ensure it functions well in your project. With and accuracy of 0.3°C and 2%rh this sensor is an easy choice for mo...

The Grove PIR Motion Sensor from Seeed Studio detects movement at up to 3m with a detection angle of 120°. When something intrudes into the detection area the sensor raises its output line to a log...

The Grove - Sound Sensor from Seeed Studio uses the combination of a simple electret microphone and a power amplifier to measure ambient sound levels. The sensor outputs an analogue value which is ...

Seeed 101020025 Grove - Tilt Switch is the equivalent of a button which has a two ball type single direction tilt sensitive trigger switch. Inside the tilt switch is a pair of balls that make conta...

Seeed 101020027 Grove - Electricity Sensor module is based on the TA12-200 current transformer which can change large alternating current into a small amplitude. You can use it to test large altern...

The Grove Thumb Joystick from Seeed Studio has two analogue outputs, one each for X and Y. The stick also has a push button, when it is pressed the analogue lines are set to maximum, otherwise they...

The Grove Digital Light Sensor from Seeed Studio gives you three detection modes, infra-red only, visible light only , and the two combined. The sensor returns a 16-bit value for the light intensit...

The Grove Piezo Vibration sensor from Seeed Studio detects vibration and outputs a logic 1 when it exceeds a threshold set by the onboard potentiometer. Applications include car alarms, security sy...

Seeed 101020033 Grove - Ear-clip Heart Rate Sensor kit contains a clip and a receiver module. The heart rate measure kit can be used to monitor heart rate of patient and athlete. The result can be ...

Seeed 101020035 Grove - Protoshield - This Grove allows you to add your own circuitry or components to your Grove system prototypes. It gives you access to all four lines from the grove connector c...

Seeed 101020036 Grove - Slide Potentiometer module incorporates a linear variable resistor with a maximum resistance of 10KΩ. When you move the slider from one side to the other, its output voltage...

The Grove Touch Sensor module is an ideal alternative for a mechanical pushbutton. The simple device uses the TTP223-B touch detector IC to measures the capacitance of a metallic pad. When a finger...

The Grove Magnetic Switch from Seeed Studio contains a dry reed switch that can be activated by a permanent magnet or electromagnet. The normally open switch is connected to a digital line and has ...

The Grove 3-axis Digital Accelerometer from Seeed Studio measures up to ±1.5g with a resolution of 6-bits. Connect this sensor to an I2C port on a Grove main board and use the downloadable library ...

Seeed 101020042 Grove - 80cm Infrared Proximity Sensor is quite small and uses a tiny connector called the Japan Solderless Terminal (JST). These connectors have three wires: Ground, VCC, and Outpu...

Seeed 101020043 Grove - UV Sensor is used for detecting the intensity of ultraviolet (UV) radiation. This form of electromagnetic radiation has shorter wavelengths than visible radiation. You can a...

Seeed 101020044 Grove - Alcohol Sensor is a complete alcohol sensor module, based on MQ303A. It has good sensitivity and fast response to alcohol.Grove - Alcohol Sensor is a complete alcohol sensor...

Seeed 101020049 Grove - Flame Sensor can be used to detect fire sources or other light sources of the wavelength in the range of 760nm - 1100 nm. It is based on the YG1006 sensor which is a high-sp...

The Grove Galvanic Skin Response sensor from Seeed Studio measures the electrical conductivity of the skin, which has been linked to sweat production due to strong emotion. It is supplied with two ...

The Grove - 3-axis Digital Accelerometer from Seeed Studio measures up to ±16g with a resolution of 10-bits. Connect this sensor to an I2C port on a Grove main board and use the downloadable librar...

Seeed 101020055 Grove - Gas Sensor(MQ2) module is useful for gas leakage detecting (in home and industry). It can detect LPG, i-butane, methane, alcohol, hydrogen and smoke. Based on its fast respo...

Seeed 101020058 Grove - EMG Detector gathers small human muscle signals then processes them with a 2th amplify and filter. The output signal can be recognized by Arduino and can be added into your ...

The Grove Infrared Temperature Sensor from Seeed Studio is a very low-power device for non-contact measurement of temperature.

The Grove Sound Sensor from Seeed Studio measures the ambient sound level and outputs it via single analogue line to any microcontroller with a spare ADC input and matching supply voltage.

Seeed 101020067 Grove - Carbon Dioxide Sensor(MH-Z16) is an infrared CO2 detection sensor which features high sensitivity and high resolution. With good selectivity, oxygen-dependent, long life, bu...

Seeed 101020071 Grove - 3-Axis Digital Accelerometer(±400g) is a low power high performance 3-axis linear accelerometer belonging to the "nano" family, with digital I2C serial interface standard ou...

The Grove Electromagnet from Seeed Studio will hold up to 1kg when energised with only 400mA at 5V DC. Because this current is beyond the capability of most microcontrollers there is an on-board lo...

Seeed 101020074 Grove - Temperature & Humidity Sensor (High-Accuracy & Mini) gives you temperature and relative humidity information at the same time. It utilizes a TH02 sensor, which is a digital ...

Seeed 101020076 Grove - Luminance Sensor provides the linear transform lumen intensity for the output voltage levels and would be suitable for application in the field of human intelligence.

Seeed 101020078 Grove - Air quality sensor v1.3 is designed for indoor air quality testing. It can respond to carbon monoxide, alcohol, acetone, thinner, formaldehyde, and other slightly toxic gase...

Seeed 101020089 Grove - Sunlight Sensor - SI1145 is a multi-channel digital light sensor which has the ability to detect UV light, visible light, and infrared light. It offers excellent performance...

Seeed 101020090 Grove - Water Atomization v1.0 is a perfect module for a humidifier with Arduino. You can also develop more advanced and interesting projects with digital scent technology and any o...

From the Grove modular connector prototyping system is the Grove - Light Sensor v1.2. This updated version gives higher reliability and sensitivity. The sensor is designed to measure light levels a...

Seeed 101020172 Grove - Line Finder v1.1 is designed for a line-following robot. It has an IR emitting LED and an IR-sensitive phototransistor which can output a digital signal to a microcontroller...

The Grove - Infrared Reflective Sensor from Seeed Studio allows your Pi or Arduino to sense the brightness reflected from a surface. This can be applied to sensing the presence or absence of an obj...

The Grove Barometer sensor is a low cost, high-precision environmental sensor that is based on the new BMP280 sensor, an upgraded version of the BMP180. The sensor can carry out precise measurement...

Seeed 101020193 Grove - BME280 Environmental Sensor is a breakout board for Bosch BMP280 which offers high-precision, low-power combined humidity, pressure and temperature sensor.

Seeed 101020212 Grove - Temperature & Humidity Sensor (SHT31) has a high-accuracy humidity sensor, it can acquire the relative humidity at only ±2% error. It also features excellent performance in ...

Seeed 101020232 Grove - Speech Recognizer is a designed voice control application which can be used for a smart home, smart toy, voice control robot or anything you would like to control through vo...

Seeed 101020341 Grove - I2C Colour Sensor V2 can recognize different colours and then drive the lamp lighting in blue, green, yellow, orange and red accordingly.This module can be used to detect th...

Seeed 101020492 Grove - 3-Axis Digital Compass BMM150 is a digital compass sensor based on Bosch BMM150. It allows measurement of the magnetic field in three perpendicular axes and the output can b...

Seeed 101020512 Grove - VOC and eCO2 Gas Sensor (SGP30) is an air quality sensor (Arduino compatible). Based on SGP30, this module provides TVOC (Total Volatile Organic Compounds) and CO2eq output ...

Seeed 101020513 Grove - Temperature, Humidity, Pressure and Gas Sensor (BME680) is a 4-in-1 environmental sensor with strong sensing capability for Temperature, Humidity, Pressure, and Gas even in ...

Seeed 101020532 Grove - Time of Flight (To F) Distance Sensor (VL53L0X) is a new generation laser-ranging module housed in the smallest package. It provides accurate distance measurement whatever t...

The Seeed Grove Capacitive Touch Sensor Slider is a versatile touch sensor with multiple functionalities. This sensor allows you to interact with your new projects by touching the two buttons or sl...

Seeed 101020556 Grove - I2C High Accuracy Temperature Sensor(MCP9808) is a high accuracy digital module based on MCP9808. Integrated with Microchip MCP9808 temperature sensor, it provides high accu...

Seeed 101020582 Grove - 3-Axis Digital Accelerometer ±16g Ultra-low Power is a 12 bit, digital, tri axial acceleration sensor with smart on-chip motion and position-triggered interrupt features. It...

Seeed 101020617 Grove - Adjustable PIR Motion Sensor is an easy-to-use Passive Infrared motion sensor which can detect infrared object motion up to 3 meters. The PIR Sensor has 2 slots, and the slo...

The ReSpeaker Core Voice Interface is an open modular voice interface for your surroundings. The interface lets you interact with your home appliances, plant, office equipment, IoT devices or anyth...

The GrovePi+ Connect from Seeed Studio gives your Pi project access to more then 70 add-on modules from the Grove range. The modules encapsulate a single function such as a light sensor or an LCD d...

The Seeed Grove Bee Socket acts as an intermediary for Xbee serial modules, allowing for the establishment of wireless links with Arduino.The socket works seamlessly with wireless components such a...

The Grove Relay Board from Seeed Studio will let you switch on higher voltage equipment, up to 10A at 250V AC, or up to 30V DC. Screw terminal are provided to connect the device you want to switch....

Seeed 103020007 Grove - Screw Terminal with four 3.5mm pitch pins, rate up to 125V @ 6A. The terminal can accept 30 to 20AWG wire which makes it the most common pitch screw terminal. This grove has...

Seeed 103020010 Grove - 2-Coil Latching Relay is based on 2-Coil Latching Relay. Contrast to the ordinary relay, this latching relay does not need continuous power to keep the state, only a rising/...

Seeed 103020011 Grove - RJ45 Adapter is a module which can convert a standard Grove connector to a RJ45 connector. Through two RJ45 adapters and a cable it is able to achieve communication between ...

Seeed 103020013 Grove - I2C ADC is a 12-bit precision ADC module based on ADC121C021. It helps you increase the accuracy of value collected from analog sensors by providing a constant reference vol...

This Seeed Grove Mouse Encoder, a mechanical incremental rotary encoder, is engineered to provide feedback on direction and speed.Featuring a standard Grove interface, it simplifies wiring and prog...

Seeed 103020132 Grove - 2-Channel SPDT Relay has two single pole - double throw (SPDT) switches. It only requires low-voltage and low current signals to control those switches. Specifically, you ca...

Seeed 103020133 Grove - 4-Channel SPDT Relay - This Single Pole Double Throw SPDT relay is quite useful in certain applications because it has one common terminal and 2 contacts which are great for...

Seeed 103020192 Grove - RS232 is made for an easy microcontroller connection with your computer. It allows simple Arduino serial communication to take place through plug and play instead of having ...

Seeed 103020193 Grove - RS485 allows your Arduino connect with RS-485 device easily, you just need to plug and play. Its a cost-effective solution in serial communication, it can be used to data ra...

The Screw Shield from Seeed Studio converts the GPIO pins on your Arduino to screw terminals. This pair of boards sits on the GPIO pins of your Arduino and also allows other shields to be stacked o...

The Seeed Grove Shield for Particle Mesh is a breakout board that is compatible with the Grove family, allowing seamless integration of hundreds of Grove modules with Particle Mesh.Using Grove elim...

Seeed 104020000 Grove - Voltage Divider also known as the Potential Divider, is a very common simple circuit which is used to change a large voltage into a small voltage. It provides an interface f...

From the Grove modular connector prototyping system is the Grove - LED Bar. The device consists of a 10-segment LED gauge bar controlled by a MY9221 LED controller. Use the light bar as an indicato...

Seeed 104020048 Grove - Grove – Chainable RGB Led V2.0 is based on a P9813 chip which is a full-colour LED driver. It provides 3 constant-current drivers as well as modulated output of 256 shades o...

Seeed 104020111 Grove - 16x2 LCD (White on Blue)is a perfect I2C LCD display for Arduino and Raspberry Pi with high contrast and easy deployment. 16x2 means two lines and each line has 16 columns, ...

Seeed 104020112 Grove - 16 x 2 LCD (Black on Red) is a high quality display panel accommodates a large number of characters; the display construction is 16 Characters * 2 Lines. It supports multipl...

Seeed 104020113 Grove - 16 x 2 LCD (Black on Yellow) is a I2C LCD display for Arduino and Raspberry Pi with high contrast and easy deployment. This high quality display panel accommodates a large n...

Seeed 104020128 Grove - RGB LED Ring (20 - WS2813 Mini) is integrated with 20 full-colour RGB LEDs with a 2KHz refresh frequency and each pixel gray levels are 256 on the stick. All the LEDs are WS...

Seeed 104020129 Grove - Triple Colour E-Ink Display 1.54''is a screen that can still be displayed after power off, we call it E-Paper (electronic paper) or E-Ink. The display is a TFT active matrix...

Seeed 104020130 Grove - Triple Colour E-Ink Display 2.13'' is a screen that can still be displayed after power off, we call it E-Paper (electronic paper) or E-Ink. The display is a TFT active matri...

Seeed 104020131 Grove - RGB LED Stick (10 - WS2813 Mini) is a full colour LED that integrated 10 full-colour RGB LEDs on this stick, with only one signal pin you can control all 10 LEDs. All the LE...

Seeed 104020132 Grove - 0.54" Red Dual Alphanumeric Display is a 2 digit alphanumeric display with high brightness and red backlight, each digit is consists of a 14-segment digital tube. The common...

Seeed 104020133 Grove - 0.54" Red Quad Alphanumeric Display is a 4 digit alphanumeric display with high brightness and red backlight, each digit is consists of a 14-segment digital tube.

This Grove 16 x 2 LCD Display from Seeed Studio has I2C communications and a programmable RGB backlight. Plus it gives you user-defined characters. A neat and eye catching display for your net proj...

Seeed 104030003 Grove - 4-Digit Display is a 12-pin module for projects that require alpha-numeric display. It controls both the content and the luminance via only 2 digital pins of Arduino or Seee...

Seeed 104030005 Grove - Red LED is a general-purpose LED module in Grove form factor, it is available in different colours. Support adjustable LED orientation and adjustable LED brightness.

Seeed 104030008 Grove - OLED Display 0.96" is an OLED monochrome 128 × 64dot matrix display module with Grove 4 pin I2C Interface.The display module has high brightness, self-emission, high contras...

Seeed 104030013 Grove - Circular LED is a circular shaped lamp circle with 24 LEDs and about 5.5 mA drive current for each channel, which could make controllable LEDs with florid effects Grove Inte...

The Grove I2C Dual Channel Motor Driver from Seeed Studio is a dual H-bridge driver that is able to supply up to 2A per channel with flyback diode protection. It can be used with 2 brushed DC motor...

Seeed 105020002 Grove - LED Strip Driver with a 4-pin Grove interface provides easy connectivity to your standard Arduino device or Seeed Stalker. It can help you control the luminance of a single-...

The Grove Vibration Motor from Seeed Studio is a coin type motor which vibrates when the input is logic high. Applications include toys, and as an alert device.

The Seeed Grove Base Shield for NodeMCU is an add-on board that enables you to experiment with Grove sensors on the ESP8266 WIFI development kit known as NodeMCU. This board allows you to utilise G...

Seeed 105020010 Grove - I2C Mini Motor Driver is a very tiny motor driver with I2C interface. It includes two motor driver chips - DRV8830, which helps you control two DC motors or winding of stepp...