Seeed (133 items)

The Mini Vibration Motor from Seeed Studio operates from 3V DC and vibrates constantly when energised. The motor is not sensitive to the polarity of the voltage applied.

Seeed 114991172 Grove - Water Flow Sensor YF-B2 Water flow sensor consists of a copper body, a water rotor, and a hall-effect sensor. When water flows through the rotor, the rotor rolls and its spe...

Seeed 114990502 Grove - I2C_LCD (With universal Grove cable) is an easy-to-use display module. Using it can reduce the difficulty of make, so that makers can focus on the core of the work.

Seeed 113060007 Grove - LoRa Radio 433MHz is RFM98, which is a transceiver features the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immu...

Seeed 113060006 Grove - LoRa Radio 868MHz is a transceiver which features the long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst min...

Seeed 113020011 Grove - UART WiFi V2 (ESP8285) is a serial transceiver module featuring the ubiquitous ESP8285 IoT SoC. With an integrated TCP/IP protocol stack, this module lets your microcontroll...

The Grove Serial Bluetooth v3.0 is designed for transparent wireless serial connection and is compatible with the Grove Base Shield. The module has fully qualified Bluetooth V2.0+EDR (Enhanced Data...

Seeed 113020007 Grove - Blueseeed (HM11) is a cost-effective, low-power, true system-on-chip (SoC) for Bluetooth low energy applications. It enables robust BLE master or slave nodes to be built wit...

Seeed 113020006 Grove - NFC - Near Field Communication (NFC) is a set of short-range wireless technologies. Grove NFC features a highly integrated transceiver module PN532 which handles contactless...

The Grove 125KHz RFID Reader from Seeed Studio can measure RFID tags within 70mm when using uem4100 cards. The reader is supplied with a detachable, plug-in antenna. You can choose between two outp...

Seeed 111020049 Grove - Mech Keycap is a mechanical switch with a build-in LED. The 255 full colour RGB LED makes it simple and easy to show the statues of your switch, it is reliable with 20,000,0...

Seeed 111020048 Grove - 5-Way Switch can be used to detect the switch position and event single click/double click/long press, etc. It can detect left / right / up / down / centre 5 directions suit...

Seeed 111020046 Grove - Blue LED Button is stable and reliable with a 100, 000 times long life and built-in LED, you can apply it to many projects. Use the LED to show the status of the button.

Seeed 111020045 Grove - Yellow LED Button is stable and reliable with a 100,000 times long life and built-in LED, you can apply it to many projects. Use the LED to show the status of the button.

Seeed 111020044 Grove - Red LED Button is stable and reliable with a 100, 000 times long life and built-in LED, you can apply it to many projects. Use the LED to show the status of the button.

Seeed 111020043 Grove - 6-Position DIP Switch has 6 individual switch positions which use I2C to transmit date. It can work as a multi-channel control switch.

Seeed 111020002 Grove - High Temperature Sensor uses a K-type thermocouple temperature detection, with a thermistor to detect the ambient temperature as temperature compensation. The detectable ran...

Seeed 110990036 Grove - Universal 4 Pin Buckled 5cm Cable (5 PCs Pack) is made for the Grove System to connect all of the Twigs to the Stem, Basic Shield or to other Grove compatible boards for qui...

The 125kHz RFID tag combo from Seeed Studio gives you a set of RFID cards and fobs which operate at 125kHz to the EM4100 standard. The key fob tags are supplied in 3 different colours, and the card...

The Grove Female Jumper set from Seeed Studio lets you bridge between a Grove socket and standard header pins such as Arduino GPIO pins.

The Universal 4-pin Grove Connectors from Seeed Studio simply connect between two Grove boards, such as between a Grove base shield and a Grove add-on module. Handy for rapid prototyping.

The Grove Smart Plant Care kit from Seeed Studio takes plant care to a whole new level by combining Grove modules with your Arduino or OrangePip. There's a set of sensors to monitor the plant's env...

The Mini Vibration Motor from Seeed Studio operates from 3V DC and vibrates constantly when energised. The motor is not sensitive to the polarity of the voltage applied.

Seeed 108020103 Grove - I2C Motor Driver (TB6612FNG) can drive two DC motors up to 12V/1.2A or drive one stepper motor up to 12V/1.2A. With the on-board MCU, it can work with Arduino easily via the...

The Seeed Grove 16-Channel PWM Driver is a high-resolution 12-bit PWM driver that is built around the NXP PCA9685 IC, allowing it to control a maximum of 16 servos with a 5V external power supply.T...

Seeed 108020021 Grove - Mini Fan v1.1 can be set up in seconds. It has four parts, a mini fan, a DC Motor, a DC motor driver and a Grove cable. The motor driver boards have a built-in programmable ...

The ReSpeaker 2-Mics Pi HAT is a Raspberry Pi expansion board that features two microphones. The features and performance are designed for AI and voice applications, meaning you can build more powe...

Seeed 107020049 Grove - I2C FM Receiver v1.1 is a wide band FM receiver module based on RDA5807M. The RDA5807M series are the latest generation single-chip broadcast FM stereo radio tuner with full...

Seeed 107020029 Grove - Recorder v3.0 allows you to record up to 83 seconds, much longer than previous 12 sec record.In V3.0, the record button has been integrated with the play back button, theref...

Seeed 107020001 Grove - Speaker is a module which consists of a power amplification and voice outputs. The loudness can be adjusted by the on-board potentiometer and there are different input frequ...

From the Grove modular connector prototyping system is the Grove - Buzzer. The buzzer can be connected to digital outputs, and will emit a tone when the output is HIGH. Alternatively it can be conn...

The gear stepper motor driver pack from Seeed Studio is a simple, low-cost solution for position control for small microcontrollers (MCU) such as the Arduino. It includes a stepper motor and a matc...

Seeed 105020073 Grove - RGB LED Matrix w/Driver is based on 64 KTR-3528RGB LEDs to form an 8 x 8 RGB LED Matrix, which is only simple programming you can control all matrix LEDs easily. You can use...

Seeed 105020010 Grove - I2C Mini Motor Driver is a very tiny motor driver with I2C interface. It includes two motor driver chips - DRV8830, which helps you control two DC motors or winding of stepp...

The Seeed Grove Base Shield for NodeMCU is an add-on board that enables you to experiment with Grove sensors on the ESP8266 WIFI development kit known as NodeMCU. This board allows you to utilise G...

The Grove Vibration Motor from Seeed Studio is a coin type motor which vibrates when the input is logic high. Applications include toys, and as an alert device.

Seeed 105020002 Grove - LED Strip Driver with a 4-pin Grove interface provides easy connectivity to your standard Arduino device or Seeed Stalker. It can help you control the luminance of a single-...

The Grove I2C Dual Channel Motor Driver from Seeed Studio is a dual H-bridge driver that is able to supply up to 2A per channel with flyback diode protection. It can be used with 2 brushed DC motor...

Seeed 104030013 Grove - Circular LED is a circular shaped lamp circle with 24 LEDs and about 5.5 mA drive current for each channel, which could make controllable LEDs with florid effects Grove Inte...

Seeed 104030008 Grove - OLED Display 0.96" is an OLED monochrome 128 × 64dot matrix display module with Grove 4 pin I2C Interface.The display module has high brightness, self-emission, high contras...

Seeed 104030005 Grove - Red LED is a general-purpose LED module in Grove form factor, it is available in different colours. Support adjustable LED orientation and adjustable LED brightness.

Seeed 104030003 Grove - 4-Digit Display is a 12-pin module for projects that require alpha-numeric display. It controls both the content and the luminance via only 2 digital pins of Arduino or Seee...

This Grove 16 x 2 LCD Display from Seeed Studio has I2C communications and a programmable RGB backlight. Plus it gives you user-defined characters. A neat and eye catching display for your net proj...

Seeed 104020133 Grove - 0.54" Red Quad Alphanumeric Display is a 4 digit alphanumeric display with high brightness and red backlight, each digit is consists of a 14-segment digital tube.

Seeed 104020132 Grove - 0.54" Red Dual Alphanumeric Display is a 2 digit alphanumeric display with high brightness and red backlight, each digit is consists of a 14-segment digital tube. The common...

Seeed 104020131 Grove - RGB LED Stick (10 - WS2813 Mini) is a full colour LED that integrated 10 full-colour RGB LEDs on this stick, with only one signal pin you can control all 10 LEDs. All the LE...

Seeed 104020130 Grove - Triple Colour E-Ink Display 2.13'' is a screen that can still be displayed after power off, we call it E-Paper (electronic paper) or E-Ink. The display is a TFT active matri...

Seeed 104020129 Grove - Triple Colour E-Ink Display 1.54''is a screen that can still be displayed after power off, we call it E-Paper (electronic paper) or E-Ink. The display is a TFT active matrix...

Seeed 104020128 Grove - RGB LED Ring (20 - WS2813 Mini) is integrated with 20 full-colour RGB LEDs with a 2KHz refresh frequency and each pixel gray levels are 256 on the stick. All the LEDs are WS...

Seeed 104020113 Grove - 16 x 2 LCD (Black on Yellow) is a I2C LCD display for Arduino and Raspberry Pi with high contrast and easy deployment. This high quality display panel accommodates a large n...

Seeed 104020112 Grove - 16 x 2 LCD (Black on Red) is a high quality display panel accommodates a large number of characters; the display construction is 16 Characters * 2 Lines. It supports multipl...

Seeed 104020111 Grove - 16x2 LCD (White on Blue)is a perfect I2C LCD display for Arduino and Raspberry Pi with high contrast and easy deployment. 16x2 means two lines and each line has 16 columns, ...

Seeed 104020048 Grove - Grove – Chainable RGB Led V2.0 is based on a P9813 chip which is a full-colour LED driver. It provides 3 constant-current drivers as well as modulated output of 256 shades o...

From the Grove modular connector prototyping system is the Grove - LED Bar. The device consists of a 10-segment LED gauge bar controlled by a MY9221 LED controller. Use the light bar as an indicato...

Seeed 104020000 Grove - Voltage Divider also known as the Potential Divider, is a very common simple circuit which is used to change a large voltage into a small voltage. It provides an interface f...

The Seeed Grove Shield for Particle Mesh is a breakout board that is compatible with the Grove family, allowing seamless integration of hundreds of Grove modules with Particle Mesh.Using Grove elim...

The Screw Shield from Seeed Studio converts the GPIO pins on your Arduino to screw terminals. This pair of boards sits on the GPIO pins of your Arduino and also allows other shields to be stacked o...

Seeed 103020193 Grove - RS485 allows your Arduino connect with RS-485 device easily, you just need to plug and play. Its a cost-effective solution in serial communication, it can be used to data ra...

Seeed 103020192 Grove - RS232 is made for an easy microcontroller connection with your computer. It allows simple Arduino serial communication to take place through plug and play instead of having ...

Seeed 103020133 Grove - 4-Channel SPDT Relay - This Single Pole Double Throw SPDT relay is quite useful in certain applications because it has one common terminal and 2 contacts which are great for...

Seeed 103020132 Grove - 2-Channel SPDT Relay has two single pole - double throw (SPDT) switches. It only requires low-voltage and low current signals to control those switches. Specifically, you ca...

This Seeed Grove Mouse Encoder, a mechanical incremental rotary encoder, is engineered to provide feedback on direction and speed.Featuring a standard Grove interface, it simplifies wiring and prog...

Seeed 103020013 Grove - I2C ADC is a 12-bit precision ADC module based on ADC121C021. It helps you increase the accuracy of value collected from analog sensors by providing a constant reference vol...

Seeed 103020011 Grove - RJ45 Adapter is a module which can convert a standard Grove connector to a RJ45 connector. Through two RJ45 adapters and a cable it is able to achieve communication between ...

Seeed 103020010 Grove - 2-Coil Latching Relay is based on 2-Coil Latching Relay. Contrast to the ordinary relay, this latching relay does not need continuous power to keep the state, only a rising/...

Seeed 103020007 Grove - Screw Terminal with four 3.5mm pitch pins, rate up to 125V @ 6A. The terminal can accept 30 to 20AWG wire which makes it the most common pitch screw terminal. This grove has...

The Grove Relay Board from Seeed Studio will let you switch on higher voltage equipment, up to 10A at 250V AC, or up to 30V DC. Screw terminal are provided to connect the device you want to switch....

The Seeed Grove Bee Socket acts as an intermediary for Xbee serial modules, allowing for the establishment of wireless links with Arduino.The socket works seamlessly with wireless components such a...

The GrovePi+ Connect from Seeed Studio gives your Pi project access to more then 70 add-on modules from the Grove range. The modules encapsulate a single function such as a light sensor or an LCD d...

The ReSpeaker Core Voice Interface is an open modular voice interface for your surroundings. The interface lets you interact with your home appliances, plant, office equipment, IoT devices or anyth...

Seeed 101020617 Grove - Adjustable PIR Motion Sensor is an easy-to-use Passive Infrared motion sensor which can detect infrared object motion up to 3 meters. The PIR Sensor has 2 slots, and the slo...

Seeed 101020582 Grove - 3-Axis Digital Accelerometer ±16g Ultra-low Power is a 12 bit, digital, tri axial acceleration sensor with smart on-chip motion and position-triggered interrupt features. It...

Seeed 101020556 Grove - I2C High Accuracy Temperature Sensor(MCP9808) is a high accuracy digital module based on MCP9808. Integrated with Microchip MCP9808 temperature sensor, it provides high accu...

The Seeed Grove Capacitive Touch Sensor Slider is a versatile touch sensor with multiple functionalities. This sensor allows you to interact with your new projects by touching the two buttons or sl...

Seeed 101020532 Grove - Time of Flight (To F) Distance Sensor (VL53L0X) is a new generation laser-ranging module housed in the smallest package. It provides accurate distance measurement whatever t...

Seeed 101020513 Grove - Temperature, Humidity, Pressure and Gas Sensor (BME680) is a 4-in-1 environmental sensor with strong sensing capability for Temperature, Humidity, Pressure, and Gas even in ...

Seeed 101020512 Grove - VOC and eCO2 Gas Sensor (SGP30) is an air quality sensor (Arduino compatible). Based on SGP30, this module provides TVOC (Total Volatile Organic Compounds) and CO2eq output ...

Seeed 101020492 Grove - 3-Axis Digital Compass BMM150 is a digital compass sensor based on Bosch BMM150. It allows measurement of the magnetic field in three perpendicular axes and the output can b...

Seeed 101020341 Grove - I2C Colour Sensor V2 can recognize different colours and then drive the lamp lighting in blue, green, yellow, orange and red accordingly.This module can be used to detect th...

Seeed 101020232 Grove - Speech Recognizer is a designed voice control application which can be used for a smart home, smart toy, voice control robot or anything you would like to control through vo...

Seeed 101020212 Grove - Temperature & Humidity Sensor (SHT31) has a high-accuracy humidity sensor, it can acquire the relative humidity at only ±2% error. It also features excellent performance in ...

Seeed 101020193 Grove - BME280 Environmental Sensor is a breakout board for Bosch BMP280 which offers high-precision, low-power combined humidity, pressure and temperature sensor.

The Grove Barometer sensor is a low cost, high-precision environmental sensor that is based on the new BMP280 sensor, an upgraded version of the BMP180. The sensor can carry out precise measurement...

The Grove - Infrared Reflective Sensor from Seeed Studio allows your Pi or Arduino to sense the brightness reflected from a surface. This can be applied to sensing the presence or absence of an obj...

Seeed 101020172 Grove - Line Finder v1.1 is designed for a line-following robot. It has an IR emitting LED and an IR-sensitive phototransistor which can output a digital signal to a microcontroller...

From the Grove modular connector prototyping system is the Grove - Light Sensor v1.2. This updated version gives higher reliability and sensitivity. The sensor is designed to measure light levels a...

Seeed 101020090 Grove - Water Atomization v1.0 is a perfect module for a humidifier with Arduino. You can also develop more advanced and interesting projects with digital scent technology and any o...

Seeed 101020089 Grove - Sunlight Sensor - SI1145 is a multi-channel digital light sensor which has the ability to detect UV light, visible light, and infrared light. It offers excellent performance...

Seeed 101020078 Grove - Air quality sensor v1.3 is designed for indoor air quality testing. It can respond to carbon monoxide, alcohol, acetone, thinner, formaldehyde, and other slightly toxic gase...

Seeed 101020076 Grove - Luminance Sensor provides the linear transform lumen intensity for the output voltage levels and would be suitable for application in the field of human intelligence.

Seeed 101020074 Grove - Temperature & Humidity Sensor (High-Accuracy & Mini) gives you temperature and relative humidity information at the same time. It utilizes a TH02 sensor, which is a digital ...

The Grove Electromagnet from Seeed Studio will hold up to 1kg when energised with only 400mA at 5V DC. Because this current is beyond the capability of most microcontrollers there is an on-board lo...

Seeed 101020071 Grove - 3-Axis Digital Accelerometer(±400g) is a low power high performance 3-axis linear accelerometer belonging to the "nano" family, with digital I2C serial interface standard ou...

Seeed 101020067 Grove - Carbon Dioxide Sensor(MH-Z16) is an infrared CO2 detection sensor which features high sensitivity and high resolution. With good selectivity, oxygen-dependent, long life, bu...

The Grove Sound Sensor from Seeed Studio measures the ambient sound level and outputs it via single analogue line to any microcontroller with a spare ADC input and matching supply voltage.

The Grove Infrared Temperature Sensor from Seeed Studio is a very low-power device for non-contact measurement of temperature.

Seeed 101020058 Grove - EMG Detector gathers small human muscle signals then processes them with a 2th amplify and filter. The output signal can be recognized by Arduino and can be added into your ...

Seeed 101020055 Grove - Gas Sensor(MQ2) module is useful for gas leakage detecting (in home and industry). It can detect LPG, i-butane, methane, alcohol, hydrogen and smoke. Based on its fast respo...

The Grove - 3-axis Digital Accelerometer from Seeed Studio measures up to ±16g with a resolution of 10-bits. Connect this sensor to an I2C port on a Grove main board and use the downloadable librar...

The Grove Galvanic Skin Response sensor from Seeed Studio measures the electrical conductivity of the skin, which has been linked to sweat production due to strong emotion. It is supplied with two ...