Seeed (130 items)

The Mini Vibration Motor from Seeed Studio operates from 3V DC and vibrates constantly when energised. The motor is not sensitive to the polarity of the voltage applied.

From the Grove modular connector prototyping system is the Grove - Button . The momentary push button outputs a HIGH when pressed and a LOW when released.

From the Grove modular connector prototyping system is the Grove - Buzzer. The buzzer can be connected to digital outputs, and will emit a tone when the output is HIGH. Alternatively it can be conn...

Seeed 104030005 Grove - Red LED is a general-purpose LED module in Grove form factor, it is available in different colours. Support adjustable LED orientation and adjustable LED brightness.

The Grove Sound Sensor from Seeed Studio measures the ambient sound level and outputs it via single analogue line to any microcontroller with a spare ADC input and matching supply voltage.

From the Grove modular connector prototyping system is the Grove - Light Sensor v1.2. This updated version gives higher reliability and sensitivity. The sensor is designed to measure light levels a...

Seeed 110990036 Grove - Universal 4 Pin Buckled 5cm Cable (5 PCs Pack) is made for the Grove System to connect all of the Twigs to the Stem, Basic Shield or to other Grove compatible boards for qui...

Seeed 103020007 Grove - Screw Terminal with four 3.5mm pitch pins, rate up to 125V @ 6A. The terminal can accept 30 to 20AWG wire which makes it the most common pitch screw terminal. This grove has...

Seeed 111020045 Grove - Yellow LED Button is stable and reliable with a 100,000 times long life and built-in LED, you can apply it to many projects. Use the LED to show the status of the button.

Seeed 111020046 Grove - Blue LED Button is stable and reliable with a 100, 000 times long life and built-in LED, you can apply it to many projects. Use the LED to show the status of the button.

From the Grove modular connector prototyping system is the Grove - Temperature Sensor. The sensor uses an onboard thermistor to measure ambient temperature over an operating range of -40 to 125°C, ...

Seeed 111020044 Grove - Red LED Button is stable and reliable with a 100, 000 times long life and built-in LED, you can apply it to many projects. Use the LED to show the status of the button.

The Grove Water Sensor from Seeed Studio can be connected to a digital input to detect the presence of water or to an analogue input to measure the amount of water. Applications include tank overfl...

Seeed 101020035 Grove - Protoshield - This Grove allows you to add your own circuitry or components to your Grove system prototypes. It gives you access to all four lines from the grove connector c...

The Grove Magnetic Switch from Seeed Studio contains a dry reed switch that can be activated by a permanent magnet or electromagnet. The normally open switch is connected to a digital line and has ...

Seeed 101020004 Grove - Switch(P) is to toggle the switch handle to make the circuit on or off, so as to achieve the purpose of switching the circuit. It features that flexible operation which give...

Seeed 101020025 Grove - Tilt Switch is the equivalent of a button which has a two ball type single direction tilt sensitive trigger switch. Inside the tilt switch is a pair of balls that make conta...

The Grove Vibration Motor from Seeed Studio is a coin type motor which vibrates when the input is logic high. Applications include toys, and as an alert device.

Seeed 101020017 Grove - Rotary Angle Sensor or potentiometer is also known as a pot meter or Pot twig produces analog output between 0 and Vcc (5V DC with Seeeduino) on its D1 connector. The angula...

The Grove Relay Board from Seeed Studio will let you switch on higher voltage equipment, up to 10A at 250V AC, or up to 30V DC. Screw terminal are provided to connect the device you want to switch....

The Seeed Grove Shield for Particle Mesh is a breakout board that is compatible with the Grove family, allowing seamless integration of hundreds of Grove modules with Particle Mesh.Using Grove elim...

Grove 103100124 Shield for Arduino Nano provides you a simple way to connect with Arduino Nano and also Seeeduino Nano. This shield pulls out the pins of the motherboard and expands to 8 Grove conn...

The Universal 4-pin Grove Connectors from Seeed Studio simply connect between two Grove boards, such as between a Grove base shield and a Grove add-on module. Handy for rapid prototyping.

The Grove Female Jumper set from Seeed Studio lets you bridge between a Grove socket and standard header pins such as Arduino GPIO pins.

Seeed 101020172 Grove - Line Finder v1.1 is designed for a line-following robot. It has an IR emitting LED and an IR-sensitive phototransistor which can output a digital signal to a microcontroller...

Seeed 111020048 Grove - 5-Way Switch can be used to detect the switch position and event single click/double click/long press, etc. It can detect left / right / up / down / centre 5 directions suit...

The Mini Vibration Motor from Seeed Studio operates from 3V DC and vibrates constantly when energised. The motor is not sensitive to the polarity of the voltage applied.

The Grove Moisture Sensor from Seeed Studio has two conductive prongs which can be pushed into soil or other substrate to measure the water content. It returns the moisture as an analogue signal, a...

The Grove Touch Sensor module is an ideal alternative for a mechanical pushbutton. The simple device uses the TTP223-B touch detector IC to measures the capacitance of a metallic pad. When a finger...

The 125kHz RFID tag combo from Seeed Studio gives you a set of RFID cards and fobs which operate at 125kHz to the EM4100 standard. The key fob tags are supplied in 3 different colours, and the card...

Seeed 111020043 Grove - 6-Position DIP Switch has 6 individual switch positions which use I2C to transmit date. It can work as a multi-channel control switch.

The Grove Ultrasonic Range Finder from Seeed Studio emits ultrasonic pulses and times the return signal to establish the distance between the sensor and a reflective object. It can measure distance...

Seeed 111020049 Grove - Mech Keycap is a mechanical switch with a build-in LED. The 255 full colour RGB LED makes it simple and easy to show the statues of your switch, it is reliable with 20,000,0...

From the Grove modular connector prototyping system is the Grove - LED Bar. The device consists of a 10-segment LED gauge bar controlled by a MY9221 LED controller. Use the light bar as an indicato...

Seeed 104030003 Grove - 4-Digit Display is a 12-pin module for projects that require alpha-numeric display. It controls both the content and the luminance via only 2 digital pins of Arduino or Seee...

Seeed 101020016 Grove - Infrared Receiver is used to receive infrared signals and remote control detection. The IR detector has a demodulator inside that looks for modulated IR at 38 kHz. The Infra...

The Grove - Sound Sensor from Seeed Studio uses the combination of a simple electret microphone and a power amplifier to measure ambient sound levels. The sensor outputs an analogue value which is ...

Seeed 104020131 Grove - RGB LED Stick (10 - WS2813 Mini) is a full colour LED that integrated 10 full-colour RGB LEDs on this stick, with only one signal pin you can control all 10 LEDs. All the LE...

The Grove - Infrared Reflective Sensor from Seeed Studio allows your Pi or Arduino to sense the brightness reflected from a surface. This can be applied to sensing the presence or absence of an obj...

Seeed 103020193 Grove - RS485 allows your Arduino connect with RS-485 device easily, you just need to plug and play. Its a cost-effective solution in serial communication, it can be used to data ra...

Grove Shield for Pi Pico v1.0 is an expansion board for Raspberry Pi Pico designed by Seeed Studio for the orderliness of your connected sensors when you develop projects with Pico. It provides fem...

The Grove Piezo Vibration sensor from Seeed Studio detects vibration and outputs a logic 1 when it exceeds a threshold set by the onboard potentiometer. Applications include car alarms, security sy...

Seeed 107020001 Grove - Speaker is a module which consists of a power amplification and voice outputs. The loudness can be adjusted by the on-board potentiometer and there are different input frequ...

The Seeed Grove Base Shield for NodeMCU is an add-on board that enables you to experiment with Grove sensors on the ESP8266 WIFI development kit known as NodeMCU. This board allows you to utilise G...

The Grove Temperature & Humidity Sensor from Seeed Studio is factory calibrated to ensure it functions well in your project.With and accuracy of ±2°C and ±5%RH this sensor is an easy choice for mos...

The Grove Thumb Joystick from Seeed Studio has two analogue outputs, one each for X and Y. The stick also has a push button, when it is pressed the analogue lines are set to maximum, otherwise they...

Seeed 104020048 Grove - Grove – Chainable RGB Led V2.0 is based on a P9813 chip which is a full-colour LED driver. It provides 3 constant-current drivers as well as modulated output of 256 shades o...

Seeed 101020013 Grove - RTC(DS1307) is based on the clock chip DS1307 and supports I2C communication. It uses a Lithium cell battery (CR1225) as it is low cost and very energy efficient. It can run...

The gear stepper motor driver pack from Seeed Studio is a simple, low-cost solution for position control for small microcontrollers (MCU) such as the Arduino. It includes a stepper motor and a matc...

Seeed 104020132 Grove - 0.54" Red Dual Alphanumeric Display is a 2 digit alphanumeric display with high brightness and red backlight, each digit is consists of a 14-segment digital tube. The common...