Seeed (133 items)

The Mini Vibration Motor from Seeed Studio operates from 3V DC and vibrates constantly when energised. The motor is not sensitive to the polarity of the voltage applied.

Seeed 114991172 Grove - Water Flow Sensor YF-B2 Water flow sensor consists of a copper body, a water rotor, and a hall-effect sensor. When water flows through the rotor, the rotor rolls and its spe...

Seeed 114990502 Grove - I2C_LCD (With universal Grove cable) is an easy-to-use display module. Using it can reduce the difficulty of make, so that makers can focus on the core of the work.

Seeed 113060007 Grove - LoRa Radio 433MHz is RFM98, which is a transceiver features the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immu...

Seeed 113060006 Grove - LoRa Radio 868MHz is a transceiver which features the long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst min...

Seeed 113020011 Grove - UART WiFi V2 (ESP8285) is a serial transceiver module featuring the ubiquitous ESP8285 IoT SoC. With an integrated TCP/IP protocol stack, this module lets your microcontroll...

The Grove Serial Bluetooth v3.0 is designed for transparent wireless serial connection and is compatible with the Grove Base Shield. The module has fully qualified Bluetooth V2.0+EDR (Enhanced Data...

Seeed 113020007 Grove - Blueseeed (HM11) is a cost-effective, low-power, true system-on-chip (SoC) for Bluetooth low energy applications. It enables robust BLE master or slave nodes to be built wit...

Seeed 113020006 Grove - NFC - Near Field Communication (NFC) is a set of short-range wireless technologies. Grove NFC features a highly integrated transceiver module PN532 which handles contactless...

The Grove 125KHz RFID Reader from Seeed Studio can measure RFID tags within 70mm when using uem4100 cards. The reader is supplied with a detachable, plug-in antenna. You can choose between two outp...

Seeed 111020049 Grove - Mech Keycap is a mechanical switch with a build-in LED. The 255 full colour RGB LED makes it simple and easy to show the statues of your switch, it is reliable with 20,000,0...

Seeed 111020048 Grove - 5-Way Switch can be used to detect the switch position and event single click/double click/long press, etc. It can detect left / right / up / down / centre 5 directions suit...

Seeed 111020046 Grove - Blue LED Button is stable and reliable with a 100, 000 times long life and built-in LED, you can apply it to many projects. Use the LED to show the status of the button.

Seeed 111020045 Grove - Yellow LED Button is stable and reliable with a 100,000 times long life and built-in LED, you can apply it to many projects. Use the LED to show the status of the button.

Seeed 111020044 Grove - Red LED Button is stable and reliable with a 100, 000 times long life and built-in LED, you can apply it to many projects. Use the LED to show the status of the button.

Seeed 111020043 Grove - 6-Position DIP Switch has 6 individual switch positions which use I2C to transmit date. It can work as a multi-channel control switch.

Seeed 111020002 Grove - High Temperature Sensor uses a K-type thermocouple temperature detection, with a thermistor to detect the ambient temperature as temperature compensation. The detectable ran...

Seeed 110990036 Grove - Universal 4 Pin Buckled 5cm Cable (5 PCs Pack) is made for the Grove System to connect all of the Twigs to the Stem, Basic Shield or to other Grove compatible boards for qui...

The 125kHz RFID tag combo from Seeed Studio gives you a set of RFID cards and fobs which operate at 125kHz to the EM4100 standard. The key fob tags are supplied in 3 different colours, and the card...

The Grove Female Jumper set from Seeed Studio lets you bridge between a Grove socket and standard header pins such as Arduino GPIO pins.

The Universal 4-pin Grove Connectors from Seeed Studio simply connect between two Grove boards, such as between a Grove base shield and a Grove add-on module. Handy for rapid prototyping.

The Grove Smart Plant Care kit from Seeed Studio takes plant care to a whole new level by combining Grove modules with your Arduino or OrangePip. There's a set of sensors to monitor the plant's env...

The Mini Vibration Motor from Seeed Studio operates from 3V DC and vibrates constantly when energised. The motor is not sensitive to the polarity of the voltage applied.

Seeed 108020103 Grove - I2C Motor Driver (TB6612FNG) can drive two DC motors up to 12V/1.2A or drive one stepper motor up to 12V/1.2A. With the on-board MCU, it can work with Arduino easily via the...

The Seeed Grove 16-Channel PWM Driver is a high-resolution 12-bit PWM driver that is built around the NXP PCA9685 IC, allowing it to control a maximum of 16 servos with a 5V external power supply.T...

Seeed 108020021 Grove - Mini Fan v1.1 can be set up in seconds. It has four parts, a mini fan, a DC Motor, a DC motor driver and a Grove cable. The motor driver boards have a built-in programmable ...

The ReSpeaker 2-Mics Pi HAT is a Raspberry Pi expansion board that features two microphones. The features and performance are designed for AI and voice applications, meaning you can build more powe...

Seeed 107020049 Grove - I2C FM Receiver v1.1 is a wide band FM receiver module based on RDA5807M. The RDA5807M series are the latest generation single-chip broadcast FM stereo radio tuner with full...

Seeed 107020029 Grove - Recorder v3.0 allows you to record up to 83 seconds, much longer than previous 12 sec record.In V3.0, the record button has been integrated with the play back button, theref...

Seeed 107020001 Grove - Speaker is a module which consists of a power amplification and voice outputs. The loudness can be adjusted by the on-board potentiometer and there are different input frequ...

From the Grove modular connector prototyping system is the Grove - Buzzer. The buzzer can be connected to digital outputs, and will emit a tone when the output is HIGH. Alternatively it can be conn...

The gear stepper motor driver pack from Seeed Studio is a simple, low-cost solution for position control for small microcontrollers (MCU) such as the Arduino. It includes a stepper motor and a matc...

Seeed 105020073 Grove - RGB LED Matrix w/Driver is based on 64 KTR-3528RGB LEDs to form an 8 x 8 RGB LED Matrix, which is only simple programming you can control all matrix LEDs easily. You can use...

Seeed 105020010 Grove - I2C Mini Motor Driver is a very tiny motor driver with I2C interface. It includes two motor driver chips - DRV8830, which helps you control two DC motors or winding of stepp...

The Seeed Grove Base Shield for NodeMCU is an add-on board that enables you to experiment with Grove sensors on the ESP8266 WIFI development kit known as NodeMCU. This board allows you to utilise G...

The Grove Vibration Motor from Seeed Studio is a coin type motor which vibrates when the input is logic high. Applications include toys, and as an alert device.

Seeed 105020002 Grove - LED Strip Driver with a 4-pin Grove interface provides easy connectivity to your standard Arduino device or Seeed Stalker. It can help you control the luminance of a single-...

The Grove I2C Dual Channel Motor Driver from Seeed Studio is a dual H-bridge driver that is able to supply up to 2A per channel with flyback diode protection. It can be used with 2 brushed DC motor...

Seeed 104030013 Grove - Circular LED is a circular shaped lamp circle with 24 LEDs and about 5.5 mA drive current for each channel, which could make controllable LEDs with florid effects Grove Inte...

Seeed 104030008 Grove - OLED Display 0.96" is an OLED monochrome 128 × 64dot matrix display module with Grove 4 pin I2C Interface.The display module has high brightness, self-emission, high contras...

Seeed 104030005 Grove - Red LED is a general-purpose LED module in Grove form factor, it is available in different colours. Support adjustable LED orientation and adjustable LED brightness.

Seeed 104030003 Grove - 4-Digit Display is a 12-pin module for projects that require alpha-numeric display. It controls both the content and the luminance via only 2 digital pins of Arduino or Seee...

This Grove 16 x 2 LCD Display from Seeed Studio has I2C communications and a programmable RGB backlight. Plus it gives you user-defined characters. A neat and eye catching display for your net proj...

Seeed 104020133 Grove - 0.54" Red Quad Alphanumeric Display is a 4 digit alphanumeric display with high brightness and red backlight, each digit is consists of a 14-segment digital tube.

Seeed 104020132 Grove - 0.54" Red Dual Alphanumeric Display is a 2 digit alphanumeric display with high brightness and red backlight, each digit is consists of a 14-segment digital tube. The common...

Seeed 104020131 Grove - RGB LED Stick (10 - WS2813 Mini) is a full colour LED that integrated 10 full-colour RGB LEDs on this stick, with only one signal pin you can control all 10 LEDs. All the LE...

Seeed 104020130 Grove - Triple Colour E-Ink Display 2.13'' is a screen that can still be displayed after power off, we call it E-Paper (electronic paper) or E-Ink. The display is a TFT active matri...

Seeed 104020129 Grove - Triple Colour E-Ink Display 1.54''is a screen that can still be displayed after power off, we call it E-Paper (electronic paper) or E-Ink. The display is a TFT active matrix...

Seeed 104020128 Grove - RGB LED Ring (20 - WS2813 Mini) is integrated with 20 full-colour RGB LEDs with a 2KHz refresh frequency and each pixel gray levels are 256 on the stick. All the LEDs are WS...

Seeed 104020113 Grove - 16 x 2 LCD (Black on Yellow) is a I2C LCD display for Arduino and Raspberry Pi with high contrast and easy deployment. This high quality display panel accommodates a large n...