![](/p.gif) | ![](/p.gif) | ![](/p.gif) | ![](/p.gif) | ![](/p.gif) | ![](/p.gif) |
Picture | | | | | Order |
![](/p.gif) |
|
|
|
4 |
|
from £ 16.68* per piece |
|
|
Trend 334 x 1/2 TCT Aquamac Recessor (3 offers) Ref 334 recessing cutter will accomodate the Schlegal Aquamac 21 seal. This cutter is designed for use with the Aquamac seal in a wiping mode and comes complete with a guide bearing to reduce setti... |
3 |
|
from £ 90.54* per piece |
|
|
|
3 |
|
from £ 81.38* per piece |
|
|
|
3 |
|
from £ 63.83* per piece |
|
|
|
3 |
|
from £ 63.83* per piece |
|
|
Trend 348 x 1/2in TCT Intumescent Cutter Set 15mm (3 offers) Cutter Set Ref. 348 is used for the grooving of door edges to receive 10mm intumescent strip. The arbor can be lowered or raised to give a wider groove for 20mm strip. Choose alternative bearings t... |
3 |
|
from £ 82.83* per piece |
|
|
|
3 |
|
from £ 59.69* per piece |
|
|
|
3 |
|
from £ 54.26* per piece |
|
|
Trend 4/08 x 1/4 TCT Two Flute Cutter 25.4 x 19mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
3 |
|
from £ 42.77* per piece |
|
|
Trend 4/1 x 1/2 TCT Two Flute Cutter 15.0 x 25mm (4 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
4 |
|
from £ 46.37* per piece |
|
|
Trend 4/1 x 1/4 TCT Two Flute Cutter 15.0 x 25mm (4 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
4 |
|
from £ 46.37* per piece |
|
|
Trend 4/24 x 1/2 TCT Two Flute Cutter 15.9 x 63mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
3 |
|
from £ 58.40* per piece |
|
|
Trend 4/29 x 1/2 TCT Two Flute Cutter 18.0 x 25mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
3 |
|
from £ 40.71* per piece |
|
|
Trend 4/29 x 1/4 TCT Two Flute Cutter 18.0 x 25mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
3 |
|
from £ 40.71* per piece |
|
|
Trend 4/2 x 1/2 TCT Two Flute Cutter 16.0 x 19mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
3 |
|
from £ 34.63* per piece |
|
|