| | | | |
Picture | | | | Order |
|
|
|
Trend 3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm (4 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 21.72* per piece |
|
|
Trend 3/10 x 1/4 TCT Two Flute Cutter 3.2 x 11mm (4 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 21.72* per piece |
|
|
Trend Loc/blk/pk1 Loc Block Support Pack (Anti-Slip) (3 offers) The Trend Loc block workpiece is a pack of four interlocking gripping blocks that lock together to allow the workpiece to be held in place when sanding, drilling and finishing. No need to use clamp... |
|
from £ 21.74* per piece |
|
|
|
|
from £ 23.10* per piece |
|
|
Trend 3/03 x 1/4 TCT Two Flute Cutter 4.5 x 11mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 23.13* per piece |
|
|
Trend 47/4 x 1/4 TCT Pierce & Trim Cutter 6.3 x 18mm (3 offers) Combination pierce and trim cutters. These cutters pierce and cut out aperture in laminate worktops. The base of the cutter acts as a guide follower. Single Flute cutters. Single Flute cutters.Cutt... |
|
from £ 23.13* per piece |
|
|
Trend 50/05 x 1/4 HSSE Helical Plunge Bit 5mm (3 offers) Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature ... |
|
from £ 23.13* per piece |
|
|
Trend 2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm (3 offers) These cutters are suitable for grooving, rebating, morticing and drilling. The single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute cutters. The depth of ... |
|
from £ 23.76* per piece |
|
|
Trend 3/02 x 1/4 TCT Two Flute Cutter 6.3 x 19mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 23.76* per piece |
|
|
|
|
from £ 23.76* per piece |
|
|
Trend UNIBASE Universal Sub Base C/w Pins & Bush (4 offers) The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. Will fit directly to most routers.Line-up pin used with a 16 mm plastic bush to ensure c... |
|
from £ 23.97* per piece |
|
|
Trend 3/1 x 1/4 TCT Two Flute Cutter 5.0 x 16mm (4 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 25.18* per piece |
|
|
|
|
from £ 25.18* per piece |
|
|
Draper Tools 89993 router bit 4 pc(s) (1 offer) 1/4' and 1/2' shank extra long router bits with TCT heads especially for use with extra thickness laminate used by kitchen fitters. Supplied with hexagon key. in storage case. Contents: 1 x Flush T... |
|
from £ 25.42* per piece |
|
|
|
|
from £ 25.71* per piece |
|
|