LED Strips & Modules (56 items)

A set of quality TL35B Test leads with 2mm safety probes and crocodile clips.The Amprobe TL35B test lead set contains two insulated lead wires with two threaded probe tips and two threaded crocodil...

The Cliff CL159711A is a Black 30A rated binding post from the T6 series of connectors.One connector supplied only.

The Cliff CL159721A is a Red 30A rated binding post from the T6 series of connectors.One connector supplied only.

The Cliff CL681560 is a Red 15A rated binding post from the SPT3 series of connectors.One connector supplied only.

The Cliff CL681561 is a Black 15A rated binding post from the SPT3 series of connectors.One connector supplied only.

The Cliff FCR19505RB is a pair of TPR/5 Series shrouded short test probes in red and black. Rated at 1KV CAT III, 10A, for use with 4mm plugs.

The Cliff FCR19506RB is a pair of TPR/6 Series unshrouded standard test probes in red and black rated at 1KV CAT III, 10A, for use with 4mm plugs.

The Cliff FCR19507RB is a pair of TPR/7 Series shrouded standard test probes in red and black rated at 1KV CAT III, 10A, for use with 4mm plugs.

The Cliff FCR19509RB is a pair of TPR/9 Series shrouded extended spike test probes in red and black rated at 1KV CAT III, 10A, for use with 4mm plugs.

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGrip™ Insulated Test leads offer reinforced strain relief an...

Product overview: Fluke TL238 SureGrip™ Test Lead Set for High Energy Environments An accessory kit especially designed for working in high energy environments. The SureGrip™ Test Probe has only 4 ...

Large jaws, long leads and a piercing needle inside the jaws. Solid, spring-loaded copper clips with a wide 12.7 mm (.50") jaw opening and serrated teeth. Large piercing needle for penetrating larg...

Very small 1 mm tips to access hard to reach test points Probe tip length up to 100 mm, test lead length: 1 m 3 sets of spring loaded gold tips and 2 sets of stainless steel tips included CAT II 10...

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or...

Better than a test probe alone – these two inch long rigid back probe pins easily pass between the weather pack seal and wire. A sharp point ensures good contact to the electrical connector, and th...

A flexible, black PVC insulator for Mueller BU-21 series crocodile clips.

A black PVC insulator for Mueller BU-46 clips.

A black, flexible PVC insulator for use with Mueller's BU-60 alligator clips.

A red, flexible PVC insulator for use with Mueller's BU-60 alligator clips.

The Electro-PJP 2001 ECO test lead and probe rack will help you manage 100+ cables on a neat and tidy rollable stand. A plastic tray is provided for accessories, measuring equipment or small items....

A wall mounting metal rack for storing test leads.

This Electro-PJP socket holding wrench is used for rapidly fitting 4mm shrouded sockets to the panels.

This Electro-PJP nut wrench is used for quickly fitting 4mm shrouded sockets to panels with a 12mm circular nut.

Professional quality black rigid probes from PJP with finger guard and rear 4mm socket.

Professional quality red rigid probes from PJP with finger guard and rear 4mm socket.

A pair of high quality multimeter test leads from PJP suitable for meters with shrouded type 4mm connectors.

Professional grade black test lead from PJP employing 1m of highly flexible 384/0.05mm silicone cable terminated at one end with a rigid shrouded probe and a fixed sheath shrouded 4mm plug at the o...

Professional quality miniature white probe hook from PJP.

Professional quality miniature blue probe hook from PJP.

Professional quality miniature yellow probe hook from PJP.

Professional quality miniature black probe hook from PJP.

Professional quality miniature red probe hook from PJP.

Professional quality miniature green probe hook from PJP.

The R-TECH 524601 4mm Test Probe, CAT II, 1000V, 32A, Black is a test probe with a spring loaded tip and a 4mm socket extension, which allows connection to other 4mm test equipment leads.Designed f...

The R-TECH 524602 4mm Test Probe, Red is a test probe with a spring loaded tip and a 4mm socket extension, which allows connection to other 4mm test equipment leads.Designed for use with the R-TECH...

The R-TECH 524605 4mm Flexible Safety Probe 30V, 10A Red is a good quality flexible test probe with a 4mm socket extension, which allows connection to other 4mm test equipment leads.Designed for us...

The R-TECH 524606 4mm Flexible Safety Probe 30V, 10A Black is a good quality flexible test probe with a 4mm socket extension, which allows connection to other 4mm test equipment leads.Designed for ...

The R-TECH 524607 4mm Insulation Piercing Test Probe CAT III, 1000V, 10A Black is a test probe with a 4mm socket extension, which allows connection to other 4mm test equipment leads.Designed for us...

The R-TECH 524608 4mm Insulation Piercing Test Probe CAT III, 1000V, 10A Red is a test probe with a 4mm socket extension, which allows connection to other 4mm test equipment leads.Designed for use ...

The R-TECH 524609 4mm Flexible Safety Probe CAT II 1000V 10A, Black is a flexible, pincer clip test probe with a 4mm socket extension, which allows connection to other 4mm test equipment leads.Desi...

The R-TECH 524610 4mm Flexible Safety Probe CAT II 1000V 10A, Red is a flexible clamp-type test probe with a 4mm socket extension, which allows connection to other 4mm test equipment leads.Designed...

The R-TECH 524611 4mm Safety Test Clip CAT III 1000V 10A, Red is a Safety Test Clip with a 4mm socket extension, which allows connection to 4mm test equipment leads.Designed for use with the R-TECH...

The R-TECH 524612 4mm Flexible Safety Probe CAT III 1000V 10A, Black is a Safety Test Clip with a 4mm socket extension, which allows connection to 4mm test equipment leads.Designed for use with the...

Single washer kit, suitable for use with RVFM terminals.

This twin washer kit contains a top twin washer that secures the two connectors, two collars, two nuts and two bottom washers.

A compact black probe with an easily operated plunger action ideally suited for making contact to component leads of high density PCBs including IC pins.

Black microminiature plunger action probe suited to making contact with components on high density PCBs including DIL packages.

Red microminiature plunger action probe suited to making contact with components on high density PCBs including DIL packages.

A compact red probe with an easily operated plunger action ideally suited for making contact to component leads of high density PCBs including IC pins.

An economical uninsulated chassis mounting earth terminal. Consists of a threaded section with captive hex nut. The knurled fixing knob is not captive to enable use of ring terminals.