This RAM-2461U consists of a 1.5" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge. The RAM-2461...
The Crown ball base contain mounting holes aligned to work with Crown Work Assist clamp accessories. The addition of the RAM mounting system allows you to position your accessories for the best acc...
The RAM-238U consists of a 1.5" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, matches the industry standard AM...
The RAM-D-101U-246 consists of a 3.68" diameter round base, STANDARD length double socket arm and 4.75" square plate with the VESA hole pattern. The 4.75" square plate has 4x100mm holes and 4x75mm ...
The RAM-246-2461U consists of a double socket arm, 3.625" square plate and 4.75" square plate. The 3.625" square plate contains a 75mm X 75mm VESA hole pattern. The 4.75" square plate contains a 4x...
The RAM-101U-IP1 consists of a zinc coated u-bolt base, double socket arm and 2.5" diameter round base that contains the universal AMPs hole pattern. Included in this package is hardware that will ...
The RAM-201LU, standard double socket arm with locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot...
The RAM-D-201U-MI1, standard size double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to...
The RAM-D-235U consists of a double u-bolt base with 2.25" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 1" to 1.25" in diameter.
The RAM Hi-Torq Wrench is designed to be used with the knob found on "D" size ball arms and mounts. The wrench matches the shape of the knob found on the side of "D" arms, and lets you give the arm...
The RAM locking knob, includes a brass 5/16"-18 thread, for 1.5" socket arms; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can...
The RAM-D-202U-IN1 consists of a reinforced post, 2.25" diameter rubber ball, connected at right angles to a 3.68" diameter round base. The base has pre-drilled holes, including two holes at 180 de...
Sometimes the simplest solution makes the most sense. The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard. Utilizing tw...
The RAP-S-NUT5-4U consists of a 1/2"-20 female threaded security nut and key knob. The RAP-S-NUT5-4U replaces all knobs on 2.25"/3.38" diameter D/E size arms and mounts. The RAP-S-NUT5-4U offers th...
This ideal forklift mount consists of a D size short double socket arm, a square D size plate with a 75 x 75mm VESA hole pattern and 4" clamp base for square post mounting on forklifts. The clamp b...
RAM Standard Heavy Duty Accessory/Display Bracket Keep your peripherals connected by simply attaching a keyboard, phone, dock, tablet and/or monitor in one secure, easy-to-access location with the ...
The RAM-D-254-WD1U consists of a 2.25" diameter rubber ball, connected to a 2.5" diameter plate containing 7 holes total: the industry standard 4-hole AMPS hole pattern and a 3-hole 120-degree hole...
The RAM-101U-247-4 consists of a double socket arm, round 2.5" diameter round base with the universal AMPS hole pattern and 4" clamp base. The clamp base will wrap around a maximum width of 4" and ...
The RAM-E-246U-IN1 consists of a 3.38" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner. This product is a steel reinforced VESA plate due to a stee...
The RAM-HOL-TAB8-CUPSU includes (2 qty) Tab-Tite cup ends and hardware. The interchangeable support cups can be used, along with all RAM Tab-Tite and Tab-Lock mounts; these include the universal ba...
The RAM Torque rail mounting base securely attaches to bars 1.5" to 2" in diameter. The double-sided Pin-Lock rail base and ball allows for the connection of up to two devices and is ideal for secu...
The RAM Torque rail mounting base securely attaches to bars 1.5" to 2" in diameter. The double-sided Pin-Lock rail base and ball allows for the connection of up to two devices and is ideal for secu...
The RAM Torque bar mount has a 1" rubber ball and accommodates rails 3/8" to 5/8" in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon...
Introducing the new RAM Tough-Ball. Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel durab...
The RAM-B-189BU consists of a double 3.3" twist lock suction cup base. Included is a hole pattern that will allow attachment to all RAM bases that contain the universal AMPs hole pattern.
The RAP-365-224-1BU consists of a triple 3.3" twist lock suction cup base with plate that contains the universal AMPs hole pattern. The suction cup is designed to have an extra strong hold on any s...