A tape Akyga® AK-CA-06 designed to connect a hard drive or a burner to an IDE connector. Adapted to support UDMA (Ultra-DMA) 133, so that it can be used with the following interfaces: ATA133, ATA10...
Internal USB adapter Akyga® AK-CA-28 made of durable ABS material, allows to connect the port in a computer case to a motherboard without a 20-pin USB 3.0 connector. After connecting the adapter, t...
Akyga AK-CA-27 is a high quality cable with a SATA III connector, intended for connecting eg hard disk drives and SSDs to the computer motherboard. The cable has a length of 50 cm.
Akyga AK-CA-31 is a high quality power splitter that allows you to divide one existing SATA power connector into two single connectors of the same type, used to connect new components, such as hard...
Akyga AK-CA-41 is an adapter equipped with a SATA plug allowing to obtain 3 SATA sockets. It will be perfect if the power supply does not have enough SATA connectors to connect components such as h...
High-quality SATA III cable with a length of 50 cm allows to connect components such as HDD/SSD drives and CD/DVD devices. Setting the connector at a 90° angle makes it easier to connect to the soc...
The Akyga® AK-CA-62 adapter allows you to extend the system with an additional two USB 3.0 ports inside the computer by connecting it to any 19-pin USB 3.0 connector on the motherboard or extension...
Akyga AK-CA-32 is a high quality power splitter, allowing the division of one existing SATA connector into two connectors - one SATA, used for connecting e.g. hard drives and SSDs and one MOLEX con...
High-quality cable Akyga® AK-CA-11 for extra MOLEX connector by connecting to SATA connector. The 15 cm cable extends the power supply, making it easy to connect components, especially in spacious ...
Akyga® AK-CA-16 is an adapter that allows you to get two additional SATA connectors by connecting to the MOLEX socket. Particularly useful when the power supply does not have enough SATA connectors...
Akyga® AK-CA-45 is a high quality adapter equipped with SATA and MOLEX connectors. It can be used as an accessory for computer cases to connect devices with a SATA SlimLine port, such as CD / DVD d...
Akyga® AK-CA-17 is an adapter that converts MOLEX to SATA connector. The adapter will be useful if the power supply does not have enough SATA connectors to connect new components, such as hard driv...
Internal adapter Akyga AK-CA-30, designed to connect graphics cards in case where the existing ATX power supply does not have a PCI-E connector. It can also be used as an optional PCI-E connector i...
Akyga® AK-CA-80 is an internal adapter for desktop PCs. The adapter enables you to convert the SATA connector available in your ATX power supply to a PCI-E 6+2-pin connector. This allows you to eas...
The Akyga® AK-CA-76 adapter is used to convert the motherboard power connector on Lenovo IdeaCentre computers. This is an extremely useful accessory in case the original power supply breaks down an...
Akyga® AK-CA-77 adapter is used to power the Lenovo/IBM motherboards. It’s incredibly useful accessory, when your regular charger is out of use and you find yourself in need of replacement. With th...
Akyga® AK-CA-52 is a power splitter that allows you to split one existing 3-pin connector into two single connectors of the same type. The splitter is designed for connecting fans in computer enclo...
The Akyga® AK-CA-65 adapter is a high-quality power splitter that allows expansion of one existing 4-pin connector with three single 2x4-pin and 1x3-pin connectors, intended for connecting fans in ...
Akyga® AK-CA-12 is an adapter enabling the connection of an older generation power supply to the processor via the MOLEX socket. Used when your power supply is not equipped with a P4 connector by d...
Akyga® AK-SC-21 cord is an ATX power supply service accessory. It is equipped with 4-pin P4 connector to power the processor. The wire stands out with high durability of materials, which ensures a ...
The Akyga® AK-CA-78 adapter is designed to extend cables in ATX power supplies. It is a 23 cm cable ended with a 4-pin plug and socket. The extension cable will be useful, when you have a spacious ...
Akyga® AK-CA-10 is an adapter that allows you to change the plug type of P4 (4-pin) power adapter to EPS/P8 (8-pin). The cable allows you to connect older models of power supplies to newer motherbo...
Akyga® AK-SC-18 is a cable that allows the replacement of broken cables in an ATX power supply with a 24-pin output. The cable with a length of 40 cm allows for free arrangement of the wiring in th...
The Akyga® AK-CA-66 adapter allows you to connect the power supply with a 20-pin output to the motherboard with a P1 (24 pin) socket. The length of the cord is 15 centimeters. The adapter is ideall...
High quality cable Akyga® AK-CA-09 designed to extend the motherboard power cords. A 30 cm long cable is a good solution for insufficient basic cable lengths, especially in case of larger and more ...
The Akyga® AK-SC-22 cable is a service element with a length of 45cm, with an 8-pin (4 + 4) EPS terminal. Used to service cables or connectors in the processor's power supply that supports the stan...
High quality cable designed to extend the ATX 12V EPS power supply’s cable. A 20 cm long cable is a good option for insufficient basic cable lengths, especially in case of larger and more spacious ...
The Akyga® AK-SC-24 cable is used to service power adapters for hard drives. The element has 3 female connectors 1x MOLEX and 2x SATA and 4 free cables coming out of the MOLEX connector. Its length...
Akyga® AK-SC-23 is a cable used to service power adapters for hard drives. The element has two female SATA and MOLEX output connectors and 4 free cables coming out of the MOLEX terminal. The cable ...
Adapter Akyga® AK-CA-13 consisting of two MOLEX slots and one 6-pin PCI-E slot, designed especially for ATX power supplies not equipped with PCI-E connector. It can also be used as an optional PCI-...
Akyga® AK-CA-29 is an internal adapter, designed to connect graphics cards in case where the existing ATX power supply does not have a PCI-E 8-pin connector. It can also be used as an optional PCI-...
Akyga® AK-CA-15 is a power adapter that allows you to get two female connectors from the MOLEX male connector. Particularly useful when the power supply in use does not have enough MOLEX connectors...
Akyga® AK-CA-40 is a power adapter that provides 3 MOLEX connectors. Particularly useful when the power supply does not have enough MOLEX connectors to connect new components, such as additional ha...
Akyga® AK-CA-55 is a high quality power adapter, especially useful when expanding the set with an additional graphics card. It allows to connect two graphic cards cooperating with a PCI-E 6 + 2-pin...
Cable Akyga® AK-CA-49 designed for mounting in computer enclosures as an adapter equipped with two female 6-pin PCI-E connectors. A 40 cm long cable is particularly useful when installing component...
The Akyga® AK-SC-19 cable is a service element that allows replacement of the inoperative cable that powers the graphics card with the PCI Express 6 pin standard. The cord length is 45 cm.
Cable Akyga® AK-CA-46 designed for mounting in computer enclosures as an extension of the 6-pin PCI-E connector. A 40 cm long cable is particularly useful when installing components in spacious enc...
Adapter Akyga® AK-CA-07 designed for connecting next generation graphics cards with 6+2-pin PCI-E input. It will work as a plug adapter for your existing PCI-E 6-pin power adapter. The 20 cm cord m...
Akyga® AK-SC-20 is a service cable that allows replacement of a cable terminated with the PCI Express standard (6 + 2 pin). The PCI Express solution is used to install expansion cards on the comput...
The Akyga® AK-CA-81 PCI-E adapter is used to extend the power supply in a desktop computer. It is an ideal addition to PC units in which we intend to overclock performance by attaching an additiona...
The Akyga® AK-CA-82 adapter is used to extend PCI-E power cables in spacious computer cases. It is the ideal solution if your ATX power supply has too short cords. The long 40 cm PCI-E extension ca...
Akyga® AK-CA-14 is a MOLEX connector adapter, it can be connected to a computer power supply to obtain an additional miniMOLEX connector, while maintaining the existing MOLEX socket. Therefore, it ...
The adapter Akyga® AK-CA-56 allows to mount a hard disk with standard SATA 2.5” or Slim SATA 2.5” in a laptop in the place of a 5.25" SATA CD/DVD drive. Made of galvanized steel ensures durability ...
Akyga® AK-CA-50 is an adapter for computer enclosures, designed for mounting a 3.5" drive in a free external 5.25" bay. Useful when all 3.5" bays are occupied or the casing does not have 3.5" at al...
Akyga® AK-CA-47 is a herring designed for mounting in the back of ATX computer cases, containing two USB 3.0 ports, specially adapted for users with motherboards with a USB 3.0 port in the form of ...
Akyga® AK-CA-54 is an adapter that allows you to obtain a SATA socket by connecting the cable to the MOLEX socket. The adapter will be perfect if the power supply does not have enough SATA connecto...