Switches (68 items)

The NVT Model NV-BNCA is an adaptor used by NVT's IP transceivers to convert from BNC to 2-wire. It ships standard with the NV-EC1701U transceivers, but can be used with TBus products as well.\nThe...

The NVT Model NV-BNCT is a high quality T adaptor used by NVT's IP transceivers to split 1701 or TBus data signals. It ships standard with the NV-EC1701-Kit2 and NV-EC1701-K2H kits.\nThe NV-BNCT ma...

The NVT Model NV-EC4BNC is an adapter used by NVT's IP transceivers to split a BNC signal four ways. It ships standard with the NV-EC1701-KIT3, NV-EC1701-KIT4, NV-EC1701-K3H, and NV-EC1701-K4H, but...

These adapters enable easy device deployment over a UTP/STP infrastructure. This helps eliminate the costs and disruptions associated with IDF closet requirements.

The NVT Phybridge 1701+ extender solution is designed to supercharge the downlink ports of a standard Ethernet switch, delivering up to 420Mbps and PoE+ over coax, single pair UTP or 2 wire infrast...

The NVT Phybridge CLEER24-10G layer 3 enterprise grade switch is designed to make IP/IoT deployments simple, secure, and cost-effective. The CLEER24-10G switch delivers up to 50 Watts of power (PoE...

The NVT Phybridge EC-Base Extender Solution is designed to supercharge the downlink ports of a standard Ethernet switch, delivering 10/100Mbps symmetrical (full duplex) and PoE over Coax infrastruc...

EC is a 10-port Ethernet over Coax switch designed specifically to facilitate a seamless switchover from an analog to an IP infrastructure by leveraging the existing coax cables to deliver Ethernet...

The FLEX Link adapter enables extended Ethernet and PoE reach beyond traditional distances. FLEX Link adapter is designed specifically to enable easy deployment over UTP for reaches beyond that of ...

Phybridge FLEX NV-FLX-08 - Switch - Managed - 8 - desktop, rack-mountable

The FLEX series of adapters and extenders are designed to extend PoE far beyond standard Ethernet reach. When used with the FLEX24 Switch or the FLEX-Base Extender, the FLEX adapters can deliver 10...

NVT Phybridge - Gender changer - 50 PIN Centronics (F) to 50 PIN Centronics (F) - 5 A - molded

The NV-RMEXT is a long reach PoE extender rack. It is designed to hold up to 8 EC-Base or FLEX-Base extenders.

The NVT Model NV-RJ45A is an adaptor used by NVT's Analog, PVD, and IP transceivers to break out RJ5 conductors to screw terminals with eight screw-terminal connections.

NV-1613 is a 16 port passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any t...

The NVT Model NV-1613S is a compact 16-channel passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) cable. Baseband (composite)...

Employing NVT Phybridge's StubEQ technology, the NV-1642 is a 16-channel active (amplified) hub that allows the transmission of real time monochrome or color video for distances up to 2,000ft (600m...

The NVT Phybridge NV-16PS10-PVD model combines a 1 A/channel power supply with pass through video and telemetry data for up to 16 cameras, all over UTP wire. Designed for installation in the wiring...

The 16-channel NV-16PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/telecom...

NV-214A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (comp...

NVT Phybridge NV-216A-PV - Video extender - up to 225 m

NV-217J-M Single Channel Passive Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) data wi...

The NVT model NV-218A-PVD video transceiver with power and data is a passive device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair telephone wire. ...

The NV-226J-PV Video Transmitter +12 VDC Converter is a passive (non-amplified) video transmitter combined with a 24 VAC to 12 VDC converter. Designed to fit on the back of a fixed 12 VDC camera, t...

NVT Phybridge NV-3213 - Passive video transceiver hub

Employing NVT Phybridge's StubEQ technology, the NV-3242 is a 32-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 2,000 ft (6...

NV-413A 4-channel video transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over unshielded twisted-pair (UTP) telephone wire. Baseba...

Employing NVT Phybridge's StubEQ technology, the NV-442 is a 4-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 2,000 ft (600...

NV-4PS10-PVD combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 4 cameras, all over UTP wire. Designed for installation in the wiring/IDF telecom closet, or...

The 4-channel NV-4PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom C...

NV-518A dual video/audio transceiver contains one amplified receiver that allows transmission of real-time monochrome or color video and audio over Unshielded Twisted-Pair (UTP) telephone wire. An ...

NVT Phybridge NV-813 PASSIVE TRANSCEIVER HUB - Transceiver - Coax - 8 ports - BNC x 8 / 2 x RJ-45 - up to 225 m - 1U

Employing NVT's StubEQ technology, the NV-842 is an 8-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 2,000ft (600m) using C...

Typically installed in the wiring closet or IDF room, the NV-716J-PVD is a pass-through wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom telemetry data onto a mini...

NVT Phybridge NV-RJ45A - Network adapter - RJ-11 (M) to 2-pole screw terminal (pack of 4)

NVT Phybridge NV-SFP-RJ45 - SFP (mini-GBIC) transceiver module - GigE - 10Base-T, 100Base-TX, 1000Base-T - RJ-45 - up to 100 m

NVT FLEX series FLEX-Link - Network extender - 100Mb LAN - 10Base-T, 100Base-TX - up to 610 m

NVT Phybridge - Power adapter - 110 Watt - for NVT Phybridge 1701+ Base

NVT Phybridge EC-Base - Network extender - 100Mb LAN - up to 1220 m

NVT Phybridge EC10 - Media converter - 1GbE - 10Base-T, 100Base-TX, 1000Base-T - RJ-45 / BNC - up to 609 m

NVT Phybridge FLEX24-10G - Switch - L4 - Managed - 24 x 10/100/1000 (PoE++) + 2 x 10 Gigabit SFP+ (uplink) - desktop, rack-mountable - PoE++

NVT Phybridge NV-EC4 - Media converter - 100Mb LAN - 10Base-T, 100Base-TX - RJ-45 / BNC

NVT Phybridge - Patch cable - RJ-45 (M) to RJ-45 (M) - 1 m - snagless - grey

The FLEX Link-C Ethernet Extender delivers Ethernet and Power over UTP cable with multiple times the reach of traditional data switches.

The award winning 24 and 48 Port PoLRE (Power over Long Reach Ethernet) switches deliver ethernet and PoE over a single pair of wire with over 1,200 ft (365 m) reach. This means you can transform y...

The PoLRE switch delivers Ethernet and Power over Ethernet over a single pair of wire with up to 1,200 ft reach. This means you can transform your existing, proven reliable voice wiring infrastruct...

The PoLRE switch delivers Ethernet and Power over Ethernet over a single pair of wire with up to 1,200 ft reach. This means you can transform your existing, proven reliable voice wiring infrastruct...

NVT Phybridge - Power adapter - 190 Watt - for NVT Phybridge EC10, FLEX8; FLEX NV-FLX-08

NVT Phybridge - Power adapter - 60 Watt - for NVT Phybridge 1701+ Base, FLEX-Link

NVT Phybridge - Power adapter - AC 100-240 V - 110 Watt - for PoLRE NV-PL-08

The NV-PS55-165W power supply delivers 55VDC at up to 165 watts for use with NVT Phybridge PoE specified products.

The NV-PS55-190W power supply delivers 55 VDC at up to 190 watts for use with NVT Phybridge PoE specified products.

NVT Phybridge - Power adapter - AC 100-240 V - 60 Watt - for NVT Phybridge NV-EC-04-XKIT

NVT Phybridge - Power supply - 1000 Watt

NVT Phybridge - Power supply - hot-plug / redundant (plug-in module) - AC 110 V - 1000 Watt - for NVT Phybridge CLEER24, CLEER24-10G, FLEX24, FLEX24-10G

NVT Phybridge - SFP (mini-GBIC) transceiver module (equivalent to: Cisco GLC-SX-MMD) - GigE, Fibre Channel - 1000Base-SX, Fibre Channel - SFP (mini-GBIC) / LC multi-mode - up to 550 m - 850 nm

NVT Phybridge - SFP (mini-GBIC) transceiver module - GigE - 1000Base-EX - LC single-mode - up to 40 km - 1310 nm

Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in I...