U.fl-SMA female pigtail, that can be used to connect your LTE card to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these pi...
1m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if you are using wAP R kit (there are special openings in the enclosure of th...
AddOn's Single-Mode fiber (SMF) Duplex LC/LC Patch Cable is an economical solution which provides high bandwidth and transmission rates over longer distances. With LC to LC termination, this high-q...
A super low loss 50cm long RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values. The name of this cable comes from c...
This is a 3m LC (Male) to LC (Male) yellow duplex LSZH fiber patch cable. OS2 is a standard single-mode optical fiber commonly used with wavelengths of 1310nm and 1550nm (9/125 microns), and has a ...
This is a 1m LC (Male) to LC (Male) aqua duplex LSZH fiber patch cable. An OM4 cable has a core size of 50m microns that supports 10 Gigabit Ethernet at lengths measuring up to 550 meters, and 100 ...
This is a 0.5m LC (Male) to LC (Male) aqua duplex LSZH fiber patch cable. An OM4 cable has a core size of 50m microns that supports 10 Gigabit Ethernet at lengths measuring up to 550 meters, and 10...
This is a 2m LC (Male) to LC (Male) aqua duplex LSZH fiber patch cable. An OM4 cable has a core size of 50m microns that supports 10 Gigabit Ethernet at lengths measuring up to 550 meters, and 100 ...
This is a 5m LC (male) to LC (male) aqua duplex riser-rated fiber patch cable. An OM3 cable has a core size of 50 microns that supports 10 Gigabit Ethernet at lengths measuring up to 300 meters, an...
AddOn Network Upgrades SFP-H10GB-CU1M-AO is a Cisco compatible SFPP transceiver that operates at over Twinax Copper Cable, with a maximum reach of 1m connected via a connector built to meet or exce...
This is a 1m LC (Male) to LC (Male) yellow duplex LSZH fiber patch cable. OS2 is a standard single-mode optical fiber commonly used with wavelengths of 1310nm and 1550nm (9/125 microns), and has a ...
This is a 3m LC (Male) to LC (Male) aqua duplex LSZH fiber patch cable. An OM4 cable has a core size of 50m microns that supports 10 Gigabit Ethernet at lengths measuring up to 550 meters, and 100 ...
This is a 1m LC (male) to LC (male) aqua duplex LSZH fiber patch cable. An OM3 cable has a core size of 50 microns that supports 10 Gigabit Ethernet at lengths measuring up to 300 meters, and 40 Gi...
AddOn Network Upgrades SFP-H10GB-CU3M-AO is a Cisco compatible SFPP transceiver that operates at over Twinax Copper Cable, with a maximum reach of 1m connected via a connector built to meet or exce...
This is a 5m LC (Male) to LC (Male) aqua duplex LSZH fiber patch cable. An OM4 cable has a core size of 50m microns that supports 10 Gigabit Ethernet at lengths measuring up to 550 meters, and 100 ...
This is a Huawei® 02310MUN-AO compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 1.0m (3.3ft). It has been programmed, uniquely seriali...
This is a 2m LC (Male) to LC (Male) yellow duplex LSZH fiber patch cable. OS2 is a standard single-mode optical fiber commonly used with wavelengths of 1310nm and 1550nm (9/125 microns), and has a ...
This is a 2m LC (male) to LC (male) aqua duplex riser-rated fiber patch cable. An OM3 cable has a core size of 50 microns that supports 10 Gigabit Ethernet at lengths measuring up to 300 meters, an...
AddOn Network Upgrades SFP-H10GB-CU5M-AO is a Cisco compatible SFPP transceiver that operates at over Twinax Copper Cable, with a maximum reach of 1m connected via a connector built to meet or exce...
This is a 5.0m (16.4ft) LC (male) to LC (male) yellow OS2 duplex LSZH-rated patch straight cable that is used for high speed data transfer. OS2 is a standard single-mode optical fiber commonly used...
This SFP+ module is a HP compatible SFP+ transceiver that operates over Passive Twinax, with a maximum reach of 1m, built to meet or exceed the OEM's specifications, and comply with MSA (Multi-Sour...
This Twinaxial cable is a hot-swappable input/output device that plugs into a 10 Gigabit Ethernet slot. It is a cost-effective way to connect within racks and across adjacent racks. AddOn's TWINAX ...
Netgear® compatible 1000Base-CU SFP to SFP direct attach cable (Passive Copper, 1m). A 100% Netgear® compatible 1000Base-CU SFP to SFP twinax direct attached cable that operates over passive copper...
We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! Thi...
This is a Dell® 470-AAVH compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 1.0m (3.28ft). It has been programmed, uniquely serialized,...
This SFP+ module is a HP compatible SFP+ transceiver that operates over Passive Twinax, with a maximum reach of .5m, built to meet or exceed the OEM's specifications, and comply with MSA (Multi-Sou...
AddOn Network Upgrades SFP-H10GB-CU2M-AO is a Cisco compatible SFPP transceiver that operates at over Twinax Copper Cable, with a maximum reach of 1m connected via a connector built to meet or exce...
This is a HP® compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 2.0m (6.6ft). It has been programmed, uniquely serialized, and data-tr...
A 100 Gbps QSFP28 direct attach cable, 1m long. Enables easy direct connectivity between two 100 Gigabit devices. Fairly flexible. Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) wit...
This Twinaxial cable is a hot-swappable input/output device that plugs into a 10 Gigabit Ethernet slot. It is a cost-effective way to connect within racks and across adjacent racks. AddOn's TWINAX ...
We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! Thi...
Meraki now Cisco® MA-CBL-TA-3M compatible 10GBase-CU SFP+ to SFP+ direct attach cable (Passive Copper, 3m). A 100% Meraki now Cisco® compatible 10GBase-CU SFP+ to SFP+ twinax direct attached cable ...
This is an HP® J9281D compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 1.0m (3.3ft). It has been programmed, uniquely serialized, and...
This SFP+ module is a HP compatible SFP+ transceiver that operates over Passive Twinax, with a maximum reach of 3m, built to meet or exceed the OEM's specifications, and comply with MSA (Multi-Sour...
This is a Cisco Meraki® MA-CBL-40G-50CM compatible 40GBase-CU QSFP+ to QSFP+ direct attach cable that operates over passive copper with a maximum reach of 50cm (1.64ft). It has been programmed, uni...
This is an HP® J9283D compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over passive copper with a maximum reach of 3.0m (9.8ft). It has been programmed, uniquely serialized, and...
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with a...
This Twinaxial cable is a hot-swappable input/output device that plugs into a 10 Gigabit Ethernet slot. It is a cost-effective way to connect within racks and across adjacent racks. AddOn's TWINAX ...
