USE THIS SNAP-IN INSERT TO HOLD THE JACKS IN YOUR GIGASTATION2 SURFACE-MOUNT HOUSINGS. - Works with GigaStation2 Surface-Mount Housings (WPT901–WPT903). - Because the insert can be pulled out of th...
The right choice when you need to build USB connectors into panels. - Build connectors into your equipment, panels, and faceplates. - Feature a Type A connector on one side and a Type B connector o...
Build connectors into your equipment, panels, and faceplates. - Couplers include bezel and snap fitting. - Build custom couplers. If your application changes, just pop in a different snap fitting. ...
Use on a finished non-boot patch cable that requires boot protection or use the various colors for cable identification. - Snagless tab protects the RJ-45 plug's locking tab. - Also available in se...
Quick Facts For our AVSP-DVI1x4 and AVSP-HDMI1x4 video splitters, as well as a number of ServSwitch™ DT and ServSwitch EC KVM switches. Further Details What's included: - (2) 19" mounting ears - (6...
Use anywhere you want to make sure a cable doesn't work its way loose. Well-suited for use in industrial areas where shock and vibration are common. Also available in 25-packs. These pins work with...
Insert into the built-in locking tab on all GigaTrue® 3 cables to secure the cable. - Pins come in convenient, economical packs of 10 or 25. - Remove the pins with the Removal Tool. - Guaranteed fo...
There's a single stripping tool for multiple applications! The BLACK BOX® Universal Stripping Tool holds two cartridges. The cartridge in use loads easily into a slot for stripping, and you can kee...
Insert into the built-in locking tab on all GigaTrue® 3 cables to secure the cable. - Pins come in convenient, economical packs of 10 or 25. - Remove the pins with the Removal Tool. - Guaranteed fo...
Use anywhere you want to make sure a cable doesn't work its way loose. Well-suited for use in industrial areas where shock and vibration are common. Also available in 10-packs. These Pins work with...
Mount a ServSwitch Wizard IP or ServSwitch Wizard IP Plus KVM switch in a rack. - Also works with the ServSwitch CX Uno, 8- or 16-Port (KV0081A, KV0161A). - Kit includes (2) L-shaped brackets and (...
Crimp and trim connector wire in one simple step. Quick Facts - Works with most RJ-45 connectors (except AMP). - Get a uniform crimp each time with the ratcheted straight action motion. Further Det...
PRODUCT FEATURES - For use with AlertWerks sensor hubs as part of the AlertWerks environmental monitoring system. - Temperature range of +4 to +122° F (-20 to +50° C). - 60° detection angle. - Maxi...
This sensor monitors airflow remotely. An airflow sensor for the Environmental Monitoring System. The Environmental Monitoring System Hub is an affordable way to monitor smaller installations. It a...
Feed-through connectors provide super-easy patching. Just plug in cables. - Unique design features RJ-45 plugs on both sides of the patch panels. - Compliant with CAT6 specs. - Work with either T56...
Rack up to 16 ServSwitch Wizard Extenders. Product Highlights - Includes rackmount brackets and mounting screws. - Holds up to 16 local or remote modules. - Mounts in any standard 19" cabinet or ra...
Connectors are oriented key up/key down or opposed. - MTP connector insertion loss is 0.75 dB (max.) at 850/1310 nm. - LC insertion loss is 0.3 dB (max.) at 850/1310 nm. - Method A connectivity.
Features 48 CAT6 RJ-45 to RJ-45 feed-through ports. - Meets Category 6 performance requirements. - Cable management bar helps support cables attached to the rear of the panel.
Feed-through connectors provide super-easy patching. Just plug in cables. - Unique design features RJ-45 plugs on both sides of the patch panel. - Compliant with CAT6 specs. - Works with either T56...