There's a single stripping tool for multiple applications! The BLACK BOX® Universal Stripping Tool holds two cartridges. The cartridge in use loads easily into a slot for stripping, and you can kee...
Connectors are oriented key up/key down or opposed. - MTP connector insertion loss is 0.75 dB (max.) at 850/1310 nm. - LC insertion loss is 0.3 dB (max.) at 850/1310 nm. - Method A connectivity.
Rack up to 16 ServSwitch Wizard Extenders. Product Highlights - Includes rackmount brackets and mounting screws. - Holds up to 16 local or remote modules. - Mounts in any standard 19" cabinet or ra...
Mount a ServSwitch Wizard IP or ServSwitch Wizard IP Plus KVM switch in a rack. - Also works with the ServSwitch CX Uno, 8- or 16-Port (KV0081A, KV0161A). - Kit includes (2) L-shaped brackets and (...
Quick Facts For our AVSP-DVI1x4 and AVSP-HDMI1x4 video splitters, as well as a number of ServSwitch™ DT and ServSwitch EC KVM switches. Further Details What's included: - (2) 19" mounting ears - (6...
This sensor monitors airflow remotely. An airflow sensor for the Environmental Monitoring System. The Environmental Monitoring System Hub is an affordable way to monitor smaller installations. It a...
Crimp and trim connector wire in one simple step. Quick Facts - Works with most RJ-45 connectors (except AMP). - Get a uniform crimp each time with the ratcheted straight action motion. Further Det...
Feed-through connectors provide super-easy patching. Just plug in cables. - Unique design features RJ-45 plugs on both sides of the patch panel. - Compliant with CAT6 specs. - Works with either T56...
Feed-through connectors provide super-easy patching. Just plug in cables. - Unique design features RJ-45 plugs on both sides of the patch panels. - Compliant with CAT6 specs. - Work with either T56...
USE THIS SNAP-IN INSERT TO HOLD THE JACKS IN YOUR GIGASTATION2 SURFACE-MOUNT HOUSINGS. - Works with GigaStation2 Surface-Mount Housings (WPT901–WPT903). - Because the insert can be pulled out of th...
Insert into the built-in locking tab on all GigaTrue® 3 cables to secure the cable. - Pins come in convenient, economical packs of 10 or 25. - Remove the pins with the Removal Tool. - Guaranteed fo...
Insert into the built-in locking tab on all GigaTrue® 3 cables to secure the cable. - Pins come in convenient, economical packs of 10 or 25. - Remove the pins with the Removal Tool. - Guaranteed fo...
PRODUCT FEATURES - For use with AlertWerks sensor hubs as part of the AlertWerks environmental monitoring system. - Temperature range of +4 to +122° F (-20 to +50° C). - 60° detection angle. - Maxi...
Use anywhere you want to make sure a cable doesn't work its way loose. Well-suited for use in industrial areas where shock and vibration are common. Also available in 25-packs. These pins work with...
Use anywhere you want to make sure a cable doesn't work its way loose. Well-suited for use in industrial areas where shock and vibration are common. Also available in 10-packs. These Pins work with...
The right choice when you need to build USB connectors into panels. - Build connectors into your equipment, panels, and faceplates. - Feature a Type A connector on one side and a Type B connector o...
Build connectors into your equipment, panels, and faceplates. - Couplers include bezel and snap fitting. - Build custom couplers. If your application changes, just pop in a different snap fitting. ...
Use on a finished non-boot patch cable that requires boot protection or use the various colors for cable identification. - Snagless tab protects the RJ-45 plug's locking tab. - Also available in se...
Features 48 CAT6 RJ-45 to RJ-45 feed-through ports. - Meets Category 6 performance requirements. - Cable management bar helps support cables attached to the rear of the panel.