Network Accessories (198 items)

For wall thickness from 1.5 to 4.5 mm, for cable entry, simply cut off at the required level to match the cable diameter.

Rittal's enclosures offer durable protection for a wide variety of applications in practically any plant floor environment. Whether you require a freestanding, floor or wall-mounted enclosure, or a...

Rittal's enclosures offer durable protection for a wide variety of applications in practically any plant floor environment. Whether you require a freestanding, floor or wall-mounted enclosure, or a...

For wall thickness from 1.5 to 4.5 mm, for cable entry, simply cut off at the required level to match the cable diameter.

For wall thickness from 1.5 to 4.5 mm, for cable entry, simply cut off at the required level to match the cable diameter.

M6 x 10 mm for T-slot mounting angle, ensure flexible, secure mounting of accessory components on the T-slot mounting angles.

For fastening the earth straps and earthing braids.

For fastening the earth straps and earthing braids.

Cable clamps for C rails

For attaching the cables to the C rails.

For attaching the cables to the C rails.

For attaching the cables to the C rails.

Enclosure, case and lock systems are supplied as standard with matching keys

For attaching the cables to the C rails.

Interface inserts blanking plate (slimline), for individual population, usable area: 45 x 75 mm

For affixing to the inside surfaces of doors.

1 U single cable bracket for guiding cables horizontally and vertically in the enclosure or within the distribution level or for extending existing units by baying by means of connecting piece. For...

Lock insert Ergoform-S lock for Ergoform-S system Packs of 1

To compensate for height differences with floor irregularities. Thread: Type: M12 x 40 Levelling range: 18 mm - 43 mm

Rittal - Security master pass key

For pre-assembled cables with connectors.

To raise the TS roof for ventilation purposes, in three different heights.

Metric and PG, protection category: IP 68 to EN 60 529, IP 69K to DIN 40 050-9.

The cable sheathing may optionally be interrupted at the contact point or removed completely inside the enclosure. The cable shield in the enclosure is retained. The supplied lock nut cuts automati...

Shunting ring Material: Round steel, zinc-plated, passivated Dimensions (W x H): 300 mm x 90 mm

Various patch panels with different connector types are available for individual configuration of small fibre-optic distributors.

May be screw-fastened, with integral top-hat rail for direct snap-mounting of components such as speed control, enclosure internal thermostat and hygrostat.

Patch panel for small fibre optic distributors for ST, SC, E-2000 and E-2000 duplex couplings

Patch panel for small fibre optic distributors for ST, SC, E-2000 and E-2000 duplex couplings

For mounting on the vertical enclosure sections. Simply position on the outside and screw-fasten either from the inside or outside.

The cable sheathing may optionally be interrupted at the contact point or removed completely inside the enclosure. The cable shield in the enclosure is retained. The supplied lock nut cuts automati...