Mounting Kits (104 items)

Lock-out; prevents reclosing of slide link; Snap-in type; for 2003 series

Connector; for busbar; 2.5 mm² … 35 mm²

Mounting carrier; for isolated mounting on DIN 35 rails

Edge guards; for DIN 35 rail (7.5 mm high)

Fixing screw; for 209-120 mounting carrier

Mounting foot; can be snapped on terminal blocks with snap-in mounting foot; for mounting on relay-modules; 6.4 mm wide

Mounting foot with screw; can be screwed on terminal blocks with fixing flange; 6.4 mm wide

Double marker carrier; for center I/O marking of the module; suitable for WSB and WMB marking

Multi mounting adapter; for male and female connectors with snap-in mounting feet

Mounting foot; can be assembled on terminal blocks with fixing flange

Steel carrier rail; 15 x 5.5 mm; 1 mm thick; 2 m long; slotted; according to en 60715

Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; according to en 60715; hole width 25 mm

Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; unslotted; according to en 60715

Steel carrier rail; 35 x 15 mm; 1.5 mm thick; 2 m long; unslotted; similar to EN 60715

Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; according to en 60715; hole width 18 mm

Steel carrier rail; 35 x 15 mm; 2.3 mm thick; 2 m long; unslotted; according to en 60715

Angled support bracket; without screw

Aluminum carrier rail; 1000 mm long; 18 mm wide; 7 mm high

Aluminum carrier rail; 35 x 8.2 mm; 1.6 mm thick; 2 m long; unslotted; similar to EN 60715

Steel carrier rail; 35 x 15 mm; 1.5 mm thick; 2 m long; slotted; similar to EN 60715

Copper carrier rail; 35 x 15 mm; 2.3 mm thick; 2 m long; unslotted; according to en 60715

Steel carrier rail; 15 x 5.5 mm; 1 mm thick; 2 m long; unslotted; according to en 60715

Aluminum carrier rail; 15 x 5.5 mm; 1 mm thick; 2 m long; unslotted; according to en 60715

Marking sleeve; for wire diameter 1.6 - 3.2 mm or 0.25 - 1.5 mm; 12 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

Marking sleeve; for wire diameter 2.2 - 4.5 mm or 0.5 - 4 mm; 12 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

Marking sleeve; for wire diameter 3.7 - 5.9 mm or 2.5 - 6 mm; 12 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

Marking sleeve; for wire diameter 5.5 - 10 mm or 10 - 25 mm; 12 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

Marking sleeve; for wire diameter 1.6 - 3.2 mm or 0.25 - 1.5 mm; 23 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

Marking sleeve; for wire diameter 2.2 - 4.5 mm or 0.5 - 4 mm; 23 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

Marking sleeve; for wire diameter 3.7 - 5.9 mm or 2.5 - 6 mm; 23 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

Marking sleeve; for wire diameter 5.5 - 10 mm or 10 - 25 mm; 23 mm long; for marker card; halogen-free; to be fitted prior to conductor termination

Marking sleeve; for wires from 10 mm²; 23 mm long; for marker card; halogen-free; for cable tie; can also be fitted subsequently

221-510 Mounting carrier; 221 Series - 6 mm²; for DIN-35 rail mounting/screw mounting; orange

Group marker carrier adjustable in height; for 1 marker card or self-adhesive label and transparent protection covers; 10 mm wide; snap-on type and adjustable in height from 43.5 mm to 59.5 mm in 2...

Mounting carrier for srew mounting or rail mounting

parallel to carrier rail; 25 mm long; Cu 10 mm x 3 mm; suitable for 790-108 and 790-116

90° to carrier rail; 45 mm long; Cu 10 mm x 3 mm; suitable for 790 Series shield clamping saddles

parallel to carrier rail; 45 mm long; Cu 10 mm x 3 mm; suitable for 790 Series shield clamping saddles and 791 Series shield clamps

Carrier with 2 grounding feet; parallel to carrier rail; 125 mm long; Cu 10 mm x 3 mm

Shield clamping saddle; 19 mm wide; diameter of compatible conductor; 7 mm to 16 mm

27 mm wide; diameter of compatible conductor; 6 mm to 24 mm

Shield clamping saddle; 43 mm wide; diameter of compatible conductor; 22 mm to 40 mm

3–8 mm diameter; 12.4 mm wide

Shield clamping saddle; 6–16 mm diameter; 21.8 mm wide

Shield clamping saddle; 6–20 mm diameter; 30 mm wide

for busbars Cu 10 mm x 3 mm; single side, straight; for DIN 35 rail

for busbars Cu 10 mm x 3 mm; single side, angled; for DIN 35 rail

Group marker carrier; fits into the jumper slot of the current bars; Module width 10 mm; for 870 Series terminal blocks