Power over Ethernet (PoE) offers an easy, fast and cost-effective solution for powering network products. A midspan injects power and data to the network device with built-in PoE support. No need t...
A splitter is used to split the power and data in an Ethernet cable into two separate cables, which then can be connected to a network device that has no built-in support for Power over Ethernet (P...
Break out one RJ-45 modular jack or plug into four jacks. - Connections are made via an integral circuit board. - For pinning information, see Application Diagram. - Guaranteed for life!
RJ-45 Modular Splitter, 5-Position, 8 x 8, Shielded, B Pinning - Break out one RJ-45 modular jack or plug into four jacks. - Connections are made via an integral circuit board. - Guaranteed for life!
6-Port (MS-6) Modem Splitter Share one high-speed modem six ways and count your cost savings! Product Highlights - Modem sharing for six users. - Includes a DB25 extension cable and a serial AT ada...
8 Digital Inputs/Outputs. - Drives high current and high voltage loads ideal for inductive, capacitive and resistive loads. - Factory floor process control and automation. - User friendly software ...
CAT 5e, Class D, RJ45 Modular Coupler Benefits: Quick and easy extention of patch cables The RJ45 sockets are shielded which provides optimized safety The coupler offers a long life time (mating cy...
CAT 6A modular couplers, shielded Corresponds with requirements channel performance Class EA ISO/IEC 11801 for up to 500 MHz Technical data: 2 x RJ-45 female Assignment: 1:1 Shielded version Materi...
The GP-101ST Gigabit PoE (Power over Ethernet) Splitter delivers both data and electrical power to non-PoE Fast Ethernet or Gigabit Ethernet–enabled products such as network cameras and wireless ac...
The equip® RJ45 Splitter is a passive component to split on RJ45 port into two, an easy and economical way to utilize existing network system with two RJ45 devices.
8P8C LAN FTP port combiner/splitter adapter: RJ-45M to double RJ-45F connectors - Allows to split 8-wire LAN port into two 4-wire ports and/or vice versa - Typical installation requires two adapter...
Separates the ADSL signal from the voice signals on a telephone line - Protects the voice signal and ADSL digital signal from the interference of a telephone and a fax machine - One RJ11 at one end...
The LevelOne POS-4000 is a PoE Splitter working with the POI-4000, FSW-0513 and POH-1260 high power PoE injectors for enabling PoE functionality to network device that requires more power. The POS-...
The traditional PoE standard supports 15.4 watts, which is fine for regular devices. But what do you do if your network camera, or wireless access point needs more power? POS-4001 is an outdoor PoE...
The POS-4002 is a high-power PoE Splitter for Power over Ethernet applications. With Ethernet Input (data + power) port and Output (data only) port, POS-4002 splits data and power from existing LAN...
The LevelOne POS-1002 PoE Splitter splits a networked PoE signal into a separate power and Fast Ethernet data sources. This device allows administrators to run Fast Ethernet speed PoE cables over l...
The LevelOne POS-5000 Gigabit High Power PoE Splitter splits a networked PoE Signal intoseparated power and Gigabit data sources. This device allows administrators to run Gigabit speed PoE cables o...
The LevelOne POS-3000 Gigabit High Power PoE Splitter splits a networked PoE Signal intoseparated power and Gigabit data sources. This device allows administrators to run Gigabit speed PoE cables o...
The LevelOne POS-5001 Gigabit High Power PoE Splitter splits a networked PoE Signal intoseparated power and Gigabit data sources. This device allows administrators to run Gigabit speed PoE cables o...
ADSL splitter used to separate data and voice signals on the DSL line Suitable for all phone networks to which the devices can be connected via RJ11 connectors.
4 x Voice or Token Ring devices to 1 port Only for analogue telephone lines, not VoIP, LAN Must be used in pairs by connecting one to a patch panel and the other to a wall outlet Low cost solution ...
LogiLinks shielded modular splitter splits the existing RJ45 port into four RJ45 ports. LogiLink passive port-multiplier is suitable for network and telephone cabling. The durable ABS plastic housi...
The LogiLink Cat5e Ethernet splitter allows two separate devices to share the same Ethernet cable. Ethernet splitters are generally used in pairs, with one cat5e splitter at the outlet and another ...
cable sharing adapter for simultaneous operation of two 4-wire services, for example: 2 phones (ISDN), via 8-wire installation line - use in pairs: one adapter on wall outlet, one adapter on distri...
With the technology of PoE, we can transfer both data and electrical power to Ethernet-enabled devices using a standard Ethernet CAT5 cable. SPL-24 plays the role of powered devices (PD) and splits...
Planet’s EPL-SPT-64 is a single-mode PLC splitter that can divide a single optical input into multiple optical outputs. - Split Ratio: 1 x 64 - Wavelength: 1260 ~ 1650nm - Max. Insertion Loss: 20.5...
Planet’s EPL-SPT-8 is a single-mode PLC splitter which can divide a single optical input into multiple optical outputs uniformly. - Split Ratio: 1 x 8 - Wavelength: 1260 ~ 1650nm - Max. Insertion L...
PLANET IEEE POE-162S 802.3at Gigabit Power over Ethernet Plus Splitter complies with IEEE 802.3at Power over Ethernet Plus standard that supports a maximum of 25.5 watts of input power. The POE-162...
Quick and Easy Gigabit High Power PoE Network Deployment PLANET POE-171S Gigabit ultra Power over Ethernet splitter delivers the Ethernet digital data with DC 56V power over the twisted pair cables...
Quick and Easy Gigabit Ultra PoE Network Deployment PLANET POE-172S Gigabit ultra Power over Ethernet splitter, meeting the IEEE 802.3at/af standard with 802.3bt ready, delivers the Ethernet digita...
Highly Convenient and Robust Industrial PoE Splitter PLANET IPOE-171S is an Industrial-grade Ultra Power over Ethernet Splitter which delivers both the Ethernet data and a 60-watt to 110-watt PoE p...
TRENDnet’s Gigabit PoE Splitter, model TPE-104GS, networks a non-PoE device in a remote location using a PoE network connection. The TPE-104GS splits a Gigabit PoE connection into separate power an...
