 | | | | |
| Picture | | | |
|
|
|
Proxxon 24098 lathe accessory (1 offer) This holder allows mounting of our rotary tool IB/E (collar size 4/5" (20 mm)) to the tool post of the Lathe PD 230/E for grinding or polishing purposes. For use with the Lathe PD 230/E. Can also b... |
|
from £ 14.22*
per piece |
|
|
Proxxon 24256 lathe accessory (2 offers) Made of steel. Complete with 2 step blocks, 2 clamps, 2 nuts and 2 T-slot nuts for MICROMOT standard 29/64" x 7/16" x 5/32" (11.5 x 11 x 4 mm). Supplied in a wooden box. For use with the lathe syst... |
|
from £ 17.80*
per piece |
|
|
Proxxon 24 020 (1 offer) Capacity to 10mm, with key and MK1, for tailstock. |
|
from £ 19.99*
per piece |
|
|
Proxxon 27024 lathe accessory (1 offer) Used to clamp asymmetrical pieces such as rectangles. - Reversible jaws clamp from 0 to 1-3/8" (0 to 35mm) inside and 35/64" to 2-5/8" (14 to 67mm) outside. - The chuck has a M16 x 1 thread for fit... |
|
from £ 24.88*
per piece |
|
|
Proxxon 24 434 Lathe edge finder set (1 offer) Used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling machines. Size 6 x 6 x 50mm and 6 x 5 x 75mm. Neatly packed in a wooden box. |
|
from £ 25.86*
per piece |
|
|
Proxxon 24 257 Lathe step clamp (2 offers) For work pieces up to 35mm thickness. Two each step blocks and clamps. With matching nuts and screws for fixation in T-slots of the MICROMOT standard (12 x 6 x 5mm). Supplied in wooden box with sli... |
|
from £ 32.41*
per piece |
|
|
Proxxon 24 417 (2 offers) Used in the PD 400 quickchange system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt. |
|
from £ 35.40*
per piece |
|
|
Proxxon 24 262 Lathe precision vice (2 offers) Used to clamp various work pieces. Made from hardened steel, precision ground in pairs. Four different depths of prism incisions V, all at 90°. Size 50 x 30 x 30mm. The solid clamp and knurled knob... |
|
from £ 36.01*
per 2 pieces |
|
|
Proxxon 27023 lathe accessory (1 offer) Highest quality set with the most frequently used chisels: tube chisel, flat chisel, pointed chisel, anvil chisel and finishing chisel. Neatly packed in a wooden box. - For use with the Micro Woodt... |
|
from £ 37.03*
per piece |
|
|
Proxxon 27026 lathe accessory (1 offer) Used to clamp concentric pieces such as round pieces. - Reversible jaws clamp from 1/16" to 1-3/8" (1.5 to 32mm) inside and 1/2" to 2-19/32" (12 to 65mm) outside. - The chuck has a M16 x 1 thread f... |
|
from £ 41.21*
per piece |
|
|
Proxxon 24 406 (2 offers) Fitted to the carriage of the lathe. Indispensable when turning long, slender work pieces. Maximum Ø 50mm. |
|
from £ 51.29*
per piece |
|
|
|
|
from £ 58.71*
per piece |
|
|
Proxxon 24 010 (1 offer) Especially for boring. Also required if the tailstock cannot be used to "counter". Up to Ø 40mm. |
|
from £ 59.62*
per piece |
|
|
Proxxon 24 404 (2 offers) Used on the PD 400 when turning long, slender work pieces. Fitted directly to the bed-ways and is used when the tailstock support is inadequate. Maximum Ø 50mm. |
|
from £ 64.08*
per piece |
|
|
Proxxon 24 082 (2 offers) Sizes: M 3 - 4 - 5 - 6 - 8 - 10. The straight shaft fits the holder Ø 10mm when mounted in the tailstock of the PD 230/E. The holder is held by hand while cutting the threads. Comes in a wooden box. |
|
from £ 66.97*
per piece |
|
