Fieldbus Modules (249 items)

The field side connection module provides 24V power for the inputs of the 8-channel input module 750-430/431. - This eliminates the need for additional terminal blocks. - The 24V supply and 0V pote...

Über die Digitalausgangsklemme werden Steuersignale aus dem Automatisierungsgerät an die angeschlossenen Aktoren weitergegeben. Die Klemme besitzt vier Ausgangskanäle und ermöglicht den Anschluss v...

This digital output module transmits control signals from the automation device to the connected actuators. The internal system voltage triggers the relay. The NO contacts are electrically isolated...

The analog input module processes signals of a standard magnitude ±10V. - The input signal is electrically isolated and is transmitted with a resolution of 16 bits. - The internal system supply pow...

This input module allows the direct connection of two thermocouples. Internal electrical isolation allows operation of grounded sensors. The module automatically linearizes the entire temperature r...

The analog input module powers the transducers, receives transmitted analog signals, and with electrical isolation, transmits the signals to the fieldbus. The 24V supply for the field is derived fr...

The analog input module powers the transducers, receives transmitted analog signals, and with electrical isolation, transmits the signals to the fieldbus. The 24V supply for the field is derived fr...

The input module directly connects to Pt resistance sensors. The connection of 2- or 3-conductor sensors is possible. The module automatically linearizes the entire temperature range. A sensor erro...

4-channel analog input; 0 ... 10 VDC; Single-ended The analog input module processes signals of a standard magnitude 0–10V. The input signal is electrically isolated and is transmitted with a resol...

The analog input module processes signals of a standard magnitude ±10V. The input signal is electrically isolated and is transmitted with a resolution of 12 bits. The internal system supply powers ...

2-channel analog input; ±10 VDC The analog input module processes signals of a standard magnitude ±10V. The input signal is electrically isolated and is transmitted with a resolution of 12 bits. Th...

4-channel analog input; 2- to 4-conductor connection; Single-ended The analog input module processes signals of a standard magnitude 4–20mA. The input signal is electrically isolated and is transmi...

2-channel analog input; 2- to 4-conductor connection; Differential input - The analog input module processes signals of a standard magnitude 4–20mA. - The input signal is electrically isolated and ...

The analog input module processes signals of a standard magnitude 0–20mA. The input signal is electrically isolated and is transmitted with a resolution of 12 bits. The internal system supply power...

The digital input module provides 8 channels in a width of just 12mm (0.47in.). It receives control signals from digital field devices (e.g., sensors). Each input module has a noise-rejection filte...

This digital input module receives control signals from digital field devices (e.g., sensors). - Each input has a bridge rectifier and capacitor and current limitation for AC/DC operation. - Each i...

This digital input module receives control signals from digital field devices (e.g., sensors). Field and system levels are electrically isolated.

The 750-660/000-001 PROFIsafe Input Module connects to emergency stop buttons, limit sensors, safety interlock switches and other safety sensors with contacts. The modules have 8 clock sensitive in...

The interface integrated in the I/O module allows the connection of any device which is equipped with an RS-485 interface. The interface operates in accordance with the TIA/EIA-485-A, DIN 66259 sta...

The interface integrated in the I/O module allows the connection of any device which is equipped with an RS-485 interface. The interface operates in accordance with the TIA/EIA-485-A, DIN 66259 sta...

The interface integrated in the I/O module allows the connection of any device which is equipped with an RS-485 interface. The interface operates in accordance with the TIA/EIA-485-A, DIN 66259 sta...

Serial TTY Interface, 9600 baud, None, 8/1 bits The interface integrated into the I/O module allows the connection of any device which is equipped with a 20mA current interface (TTY). This interfac...

The interface integrated in the I/O module allows the connection of any device which is equipped with an RS-232 C interface. The interface operates in accordance with the TIA/EIA-F, CCITT V.28/DIN ...

The interface integrated in the I/O module allows the connection of any device which is equipped with an RS-232 C interface. The interface operates in accordance with the TIA/EIA-F, CCITT V.28/DIN ...

The interface integrated in the I/O module allows the connection of any device which is equipped with an RS-232 C interface. The interface operates in accordance with the TIA/EIA-F, CCITT V.28/DIN ...

The interface integrated in the I/O module allows the connection of any device which is equipped with an RS-232 C interface. The interface operates in accordance with the TIA/EIA-F, CCITT V.28/DIN ...

2-channel vibration velocity/bearing condition monitoring VIB I/O The VIB I/O modules are used for online monitoring of the machine vibration level. It records the two most important parameters req...

MP-Bus Master The 750-643 I/O module acts as a master for the MP bus (Multi Point Bus from Belimo/Switzerland) and allows the bus to be integrated into a higher level bus network such as Ethernet o...

DALI/DSI master module The DALI standard (IEC 60929), a protocol across all manufacturers, ensures the interoperability of electronic ballasts in lighting applications. This new standard is substit...

Real-time clock Module The 750-640 RTC Module provides the higher-level control system with the actual time. The time is buffered and continues to run in the event of a power failure. When an exter...

2 up/down counter; 16 bits; 500 Hz The I/O module has two counters that count 24VDC binary pulses independently of one another. The data is then transmitted to the control via the fieldbus. The cou...

Incremental encoder interface; 24 VDC; Single-ended; 32 bits This module is an interface for incremental encoders with standard connections (e.g., RS-422, differential, single-ended). A counter wit...

Incremental encoder interface; RS-422; 32 bits This module is an interface for incremental encoders with standard connections (e.g., RS-422, differential, single-ended). A counter with quadrature d...

The digital impulse interface is designed for the connection of magnetostrictive distance measurement sensors with a start/stop interface. After receiving a read pulse, these sensors deliver a time...

SSI transmitter interface; 13 bits; 125 kHz; Gray code This module is an SSI interface for the direct connection to an SSI transmitter. After the interface has given a clock pulse to the sensor, th...

This module is an SSI interface for the direct connection to an SSI transmitter. After the interface has given a clock pulse to the sensor, the interface reads the incoming data and transmits it di...

SSI transmitter interface; 25 bits; 125 kHz; Gray code This module is an SSI interface for the direct connection to an SSI transmitter. After the interface has given a clock pulse to the sensor, th...

This module is an SSI interface for the direct connection to an SSI transmitter. After the interface has given a clock pulse to the sensor, the interface reads the incoming data and transmits it di...

This module is an SSI interface for the direct connection to an SSI transmitter. After the interface has given a clock pulse to the sensor, the interface reads the incoming data and transmits it di...

This module is an SSI interface for the direct connection to an SSI transmitter. After the interface has given a clock pulse to the sensor, the interface reads the incoming data and transmits it di...

SSI transmitter interface; Fail-safe 2 channel analog input; 125 kHz; Binary code This module is an SSI interface for the direct connection to an SSI transmitter. After the interface has given a cl...

This module is an SSI interface for the direct connection to an SSI transmitter. After the interface has given a clock pulse to the sensor, the interface reads the incoming data and transmits it di...

Bus Extension Coupler Module The coupler module for the internal data bus extension module 750-628 replaces the fieldbus coupler/controller at an I/O terminal block. It is also the mating piece for...

Bus Extension End Module The end module for the internal data bus extension 750-627 is attached to the end of the I/O terminal block like the standard end module 750-600. The block is terminated wi...

The WAGO‐I/O-SYSTEM 750 can also be used in shipbuilding applications and onshore/offshore installations (e.g., platforms, loading facilities). This is possible via certification under the standard...

Power Supply; 24 V/5 … 15 VDC The I/O module generates 5V, 8V, 10V, 12V and 15V DC output voltages from the 24VDC input voltage. The output voltage is selected by a DIP switch located on the side o...

Binary Spacer Module Binary spacer modules reserve bit addresses in the process image of a fieldbus node. The operating mode as well as the bit width can be adjusted by DIP switches on the side of ...

Distance Module The separation module visually divides a fieldbus node into sections. Separation module 750-621 has power jumper contacts that can supply the power to adjacent bus modules.

The separation module visually divides a fieldbus node into sections. Separation module 750-616/030-000 has no power jumper contacts.

The supply module provides the I/O modules with the corresponding supply potential. The maximum current at the supply module is 6.3A. When configuring the system, it must be ensured that this total...

Field side connection module for multiple tapping of the supply voltage. This eliminates the need for additional terminal blocks.

The internal system supply module increases the current supply for the internal system by 2A. If the internal current consumption of all modules is higher than 2A, an additional supply module must ...

The supply module provides the I/O modules with the corresponding supply potential. The maximum current at the supply module is 10A. When configuring the system, it must be ensured that this total ...

The supply module provides the I/O modules with the corresponding supply potential. The maximum current at the supply module is 6.3A. When configuring the system, it must be ensured that this total...