actuators  (22,938 offers of 5,556,577 product items)

The Festo ESBF series electric cylinder is a linear drive with ball screw in design for proximity sensor. It has a electrically actuated spindle that converts the rotary motion of the motor into li...

The Festo on-off valve used for service unit with threaded connecting plate with FRB threaded pin which has pneumatic actuator and piston slide of structure. It used operating pressure up to 0 -16 ...

The Festo spindle axis EGC-80-800-BS-10P-KF-0H-ML-GK With recirculating ball bearing guide. It has flexible motor mountingWorking stroke=800 mm Size=80 Stroke reserve=0 mm Spindle diameter=15 mm Sp...

The Festo pneumatic shock absorber has elastic cushioning ring without fixed metallic stop and assembled in any position. Its size is M10 with threaded sleeve mounting. The stroke size is 1mm which...

The Festo EGSL series mini slide with recirculating ball bearing spindle design structure for proximity sensor. The mini slide is parallel running in the z-direction of 0.012 mm.Size=75 Parallelism...

The Festo hand lever valve used manual actuator with 4/3 exhausted valve function. Its standard nominal flow rate is 600 l/min and gives operating pressure up to 0 - 10 bar. It width size is 51mm. ...

The Festo self-aligning rod coupler compensate for angular and radial misalignment for fitting on piston rod side which size is M10 and used steel material for housing. It has 2 - moderate corrosio...

The Festo pneumatic shock absorber has elastic cushioning ring without fixed metallic stop and assembled in any position. Its size is M5 with threaded sleeve mounting. The stroke size is 1.5mm whic...

The Festo EAGF series guide unit with recirculating ball bearing is used for protecting electric cylinders against torsion at high torque loads .Size=50 Stroke=320 mm Assembly position=Any

The Festo rod eye with hexagonal nut for spherical swivelling cylinder mounting has size M27x2 which used steel for housing material and has 1 - low corrosion stress.Ambient temperature -40 - 150 °...

The Festo push-in connector with push-in sleeve used with tube1 size 12mm. It used push/pull principle of structure with nominal size is 6.3mm. It used 1 - low corrosion stress.Ambient temperature ...

The Festo service unit combination of MS series has filter-regulator-lubricator combination which give 12 bar maximum output pressure. It used plastic guard with pressure gauge and manual condensat...

The Festo ESBF series electric cylinder is a linear drive with ball screw in design for proximity sensor. It has a electrically actuated spindle that converts the rotary motion of the motor into li...

The Festo sensor box SRBC-CA3-YR90-N-1-ZU-C2P20 for electrical feedback and position monitoring of process valves actuated with pneumatic quarter turn actuators.Authorisation=(* RCM Mark, * c CSA u...

The Festo pneumatic shock absorber has elastic cushioning ring without fixed metallic stop and assembled in any position. Its size is M4 with threaded sleeve mounting. The stroke size is 0.9mm whic...