| | | | |
Picture | | | | Order |
|
|
|
Trend 4/8 x 1/2 TCT Two Flute Cutter 25.4 x 25mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 46.08* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17041/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.6406" (41/64) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 34.766* per piece |
|
|
End Mill C2477.0 (1 offer) Short series end mill with 4 flutes, diameter 7mm with 16mm length of cut and 66mm overall length, according to DIN 844 K standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright f... |
|
from £ 45.658* per piece |
|
|
Trend 4/80 x 1/2 TCT Two Flute Cutter 25.4 x 37mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 57.37* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17043/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.6719" (43/64) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 27.456* per piece |
|
|
End Mill C2737.0 (1 offer) Long series end mill with 4 flutes, diameter 7mm with 30mm length of cut and 80mm overall length, according to DIN 844 L standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright fi... |
|
from £ 56.605* per piece |
|
|
|
|
from £ 30.85* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17045/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.7031" (45/64) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 35.049* per piece |
|
|
End Mill C2731/4 (1 offer) Long series end mill with 4 flutes, diameter 1/4" with 30mm length of cut and 80mm overall length, according to DIN 844 L standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright f... |
|
from £ 56.345* per piece |
|
|
|
|
from £ 64.88* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17047/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.7344" (47/64) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 38.188* per piece |
|
|
End Mill C2733/8 (1 offer) Long series end mill with 4 flutes, diameter 3/8" with 45mm length of cut, 95mm overall length and 54.5mm reach with neck relief, according to DIN 844 L standard with a 10mm Weldon shank, powder me... |
|
from £ 61.573* per piece |
|
|
Trend 50/05 x 1/4 HSSE Helical Plunge Bit 5mm (3 offers) Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature ... |
|
from £ 22.75* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17049/64 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.7656" (49/64) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
from £ 36.145* per piece |
|
|
End Mill S9048.0 (1 offer) Regular length end mill with 4 flutes, diameter 8mm with 19mm length of cut, 63mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 8mm plain shank, solid ca... |
|
from £ 25.801* per piece |
|
|