greenlee  (166 offers of 5,562,019 product items)

Front mounting dimensions permit adequate clearance where 'harness through' assembly of connector and wiring is required. Rear mounting dimensions are recommended for standard assembly. D Connector...

Greenlee Hydraulic Draw StudThe Greenlee hydraulic draw stud is suitable for punch up to 3.5mm in mild steel and stainless steel bolt. The split slugs can easily fall free and cannot cling to draw ...

Greenlee Hole PunchThe Greenlee hole punch is a high-efficiency tool used for getting a rectangular shape cut-out with a hole size of 92mm height and 46mm width. It is used to punch burr-free holes...

Special Size Hole Punches. Use to punch burr-free holes for switches and instruments in enclosures. Die alignment marks for accurate alignment Punch up to 3.0mm mild steel and up to 1.5mm stainless...

Greenlee Hole PunchThe Greenlee hole punch is a high-efficiency tool used for getting a rectangular shape cut-out with a hole size of 92mm height and 46mm width. It is used to punch burr-free holes...

Hand/Hydraulic Punches. High quality punches for fast accurate panel punching. Capacity up to 2.0mm mild steel depending on size Ball bearing draw stud to minimise working force required For hydrau...

Greenlee Punch ToolThe Greenlee hole punch is a high-efficiency tool used for getting a square shape cut-out with a hole size of 92mm height and 92mm width. It is used to punch burr-free holes for ...

Front mounting dimensions permit adequate clearance where 'harness through' assembly of connector and wiring is required. Rear mounting dimensions are recommended for standard assembly. D Connector...

ISO Hand Punches. Slug buster are round and special shape punches with a unique profile for slug splitting, allowing easy slug removal. Slug buster punches are usually suitable for mild steel, plas...

Special Size Hole Punches. Use to punch burr-free holes for switches and instruments in enclosures. Die alignment marks for accurate alignment Punch up to 3.0mm mild steel and up to 1.5mm stainless...

Greenlee Hole PunchThe Greenlee hole punch is a high-efficiency tool used for getting a square shape cut-out with a hole size of 45mm height and 45mm width. It is used to punch burr-free holes for ...

For Use With Flat & Round Cables Stripping Capacity Metric 0.08mm² to 6mm² Product Range - Stripping Capacity AWG 34AWG to 10AWG SVHC No SVHC (17-Dec-2015)

Designed specifically for the security and alarm industry, the 620K provides a simple method for identifying intermittent failures (swingers) and confirming operation of switches at remote location...

Crimp Die Applications Contacts For Use With - Product Range - SVHC No SVHC (14-Jun-2023)

Measurement category I is for measurements performed on circuits not directly connected to a mains supply. AdaptaJack™ Test Access Adaptors. Designed with safety in mind, these new adaptors accept ...