isolator  (5,462 offers of 5,842,410 product items)

Number of Channels = 2 Module Type = Galvanic Barrier/Isolator Barrier Type = Galvanic Barrier Output Signal Type = 0/4 to 20 mA Maximum Voltage = 24V dc Hazardous Area Certification = SIL 2, Zone ...

Number of Channels = 1 Module Type = Galvanic Barrier/Isolator Barrier Type = Galvanic Barrier Output Signal Type = 0/4 to 20 mA Maximum Voltage = 230V ac/dc Hazardous Area Certification = SIL 2, Z...

The ON Semiconductor galvanic ally isolated full duplex, bi-directional, high-speed dual-channel digital isolator supports isolated communications thereby allowing digital signals to communicate be...

Maximum Data Rate = 50Mbps Package Type = SOIC Maximum Forward Voltage = 5V Maximum Input Current = 2 A Isolation Voltage = 2 kV Number of Pins = 16

Number of Channels = 2 Module Type = Galvanic Barrier/Isolator Barrier Type = Galvanic Barrier Output Signal Type = 0/4 to 20 mA Maximum Voltage = 24V dc Hazardous Area Certification = SIL 2, Zone ...

Maximum Data Rate = 10Mbps Package Type = SOIC Maximum Input Current = 1 μA Isolation Voltage = 5 kV Number of Pins = 16

Maximum Data Rate = 50Mbps Package Type = SOIC Maximum Forward Voltage = 5V Maximum Input Current = 2 A Isolation Voltage = 2 kV Number of Pins = 16

Maximum Data Rate = 10Mbps Package Type = SOIC Maximum Input Current = 1 μA Isolation Voltage = 5 kV Number of Pins = 16

PR Electronics 6185 Loop-powered Isolator. PR Electronics 6185 series are loop powered isolators provide galvanic separation of analogue current signals. Designed to give a simple and efficient sol...

The ON Semiconductor NCID94xx is a galvanically isolated high−speed quad−channel digital isolator with output enable. This device supports isolated communications thereby allowing digital signal to...

Module Type = Loop Powered Isolator Supply Voltage = 17.5V ac Series = AIMI

J-Link USB Isolator Board. The J-Link USB Isolator may be connected in a J-Link Probe to Host PC USB link to provide electrical isolation. This is essential when development tools are not connected...

SEGGER Microcontroller J-TraceThe SEGGER Microcontroller KG J-Trace is an isolator. It can be connected between a J-Trace Pro V2 or any ARM-board that uses the standard 19-pin Cortex-M connector to...

ADAM-4561/4562 allows PC users to connect a serial device to a system that use a USB interface. To attach the ADAM-4561/4562 to a PC, you don’t need to open the chassis or power down your PC. Insta...