signal conditioners  (7,667 offers of 5,747,600 product items)

MACX MCR Loop Powered Isolators. Phoenix Contact MACX MCR series loop powered isolators for the electrical isolation of analogue signals. Available as single or dual channel devices with active sen...

The Phoenix Contact NAMUR signal conditioner with wide range power supply for proximity sensors and switches. It is used for line fault detection.Degree of pollution 2 Overvoltage category III Grey...

Repeater power supply for supplying 2 and 3-conductor transmitters with HART transmission and wide range power supply, SIL, Push-in connection

Limit value switch with input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical isol...

Limit value switch with Ex i input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical...

Repeater power supply for supplying 2 and 3-conductor transmitters with HART transmission and wide range power supply, SIL, screw connection

Measuring transducer repeater power supply and input signal conditioner, HART-transparent. Transmits supplied or active 0/4…20 mA electrically isolated signals from the field to two loads. 4-way el...

The Phoenix Contact MACX series have isolation amplifier for operating proximity sensors and switches in Ex areas. This isolation amplifier have 24 V dc nominal supply voltage with push in connecti...

Ex i temperature transducer: converts signals from resistance temperature detectors installed in the Ex area and transmits a 0/4 - 20 mA signal to a load in the safe area. Freely programmable. 3-wa...

3-way output signal conditioner for transmitting 0/4 .. 20 mA signals from the controller to a load located in the field with simultaneous 3-way electrical isolation between the input, output, and ...

4-way power supply doubler with plug-in connection technology. HART-transparent, 0(4) mA ... 20 mA input signal, 0(4) mA ... 20 mA output signals. The device can be used in both signal and power su...

The Phoenix Contact MACX series have temperature measuring transducer with analog output and 1 limit value relay. This transducer have push in connection with 4 mA to 20 mA current output signal.Re...

Output loop-powered temperature transducer, two universal inputs for thermocouples, resistance and voltage sensor, HART communication, freely configurable, installable in Zone 2, SIL 2/3

MACX MCR Loop Powered Isolators. Phoenix Contact MACX MCR series loop powered isolators for the electrical isolation of analogue signals. Available as single or dual channel devices with active sen...

Output loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of unipolar and bipolar analog signals. Input configurable via DIP switch. Push-in connection tech...