surge  (37,427 offers of 5,455,884 product items)

Mounting Type = Surface Mount Package Type = SOD-323HE Maximum Continuous Forward Current = 500mA Peak Reverse Repetitive Voltage = 30V Diode Configuration = Single Rectifier Type = Schottky Diode ...

Device Type = Surge Protector Maximum Surge Current = 10kA Range = TERMITRAB Series = TTC Electrical Phase = 1 Mounting Style = DIN Rail

The Phoenix Contact surge protection device has ability of signalling without additional auxiliary power, thanks to the mechanical status indicator. It has grounded or insulated shield grounding.Er...

Sensor/actuator cable, 3-position, PVC, yellow, shielded, Plug straight M8, on Socket angled M8, cable length: 0.5 m

Mounting Type = Surface Mount Package Type = SOD-106 Maximum Continuous Forward Current = 1.5A Peak Reverse Repetitive Voltage = 400V Diode Configuration = Single Rectifier Type = Fast Recovery Dio...

The Phoenix Contact type 2 surge arrester has no mismatching of plugs, thanks to mechanical coding. It is free of leakage current to ground.Space-saving installation Easy replacement during servicing

Rail-mountable module with surge voltage coarse and fine protection for RS-485 interface, for mounting on NS 35/7.5, housing width: 50 mm

Sensor/actuator cable, 4-position, PVC, yellow, shielded, Plug straight M8, on Socket straight M8, cable length: 0.5 m

Rectifier Diodes, ROHM

Plug-in surge arrester, in accordance with Type 2/Class II, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact.

Rail-mountable surge arrester for higher signal voltages. Protective circuit free of leakage current for two floating signals.Nominal voltage: 230 V AC

Sensor/actuator cable, 4-position, PVC, yellow, free cable end, on Socket straight M8, cable length: 5 m

Small mold type (UMD2) High reliability Low VF

Replacement plug for lightning current arresters from the FLASHTRAB SEC PLUS 264 product range, for L-N and L-PEN paths.

Surge protection with integrated status indicator and knife disconnection for a 2-wire floating signal circuit, e. g. 0(4)...20 mA current loop, HART-compatible.