vcc  (6,667 offers of 5,800,125 product items)

CMOS 3.0 Volt Core with Versatile I/O 65 nm MirrorBit Eclipse Technology Single supply (VCC) for read / program / erase (2.7 V to 3.6 V) Versatile I/O Feature Wide I/O voltage range (VIO): 1.65 V t...

Bi-directional interface between any 2 levels from 1.1V to 3.6V Fully configurable: Inputs track VCC level Non-preferential power-up sequencing, either VCC may be powered-up first Outputs remain in...

High Speed: tPD = 5.4 ns (typ) at VCC = 5V Low power dissipation: ICC = 4 μA (max) at TA = 25°C High noise immunity: VNIH = VNIL = 28% VCC (min) Power down protection is provided on all inputs Low ...

Guaranteed Data Rate Options 230kbps 8Mbps (+1.2V ≤ VL ≤ VCC ≤ +5.5V) 10Mbps (+1.2V ≤ VL ≤ VCC ≤ +3.3V) 16Mbps (+1.8V ≤ VL ≤ VCC ≤ +2.5V and +2.5V ≤ VL = VCC ≤ +3.3V) Bidirectional Level Translatio...

5V tolerant inputs and outputs 2.3V-3.6V VCC specifications provided 4.5 ns tPD max (VCC = 3.3V), 20 μA ICC max Power down high impedance inputs and outputs Supports live insertion/withdrawal (Note...

Converts CMOS SRAM into nonvolatile memory Unconditionally write-protects SRAM when VCC is out of tolerance Automatically switches to battery backup supply when VCC power failure occurs Monitors vo...

The TS555 is a single CMOS timer with very low consumption: (Icc(TYP)TS555 = 110 μA at VCC = +5 V versus Icc(TYP)NE555(a)= 3 mA), and high frequency: (ff(max.) TS555 = 2.7 MHz versus f(max)NE555(a)...

1.8% Accurate Adjustable Threshold Over Temperature Operate from VCC of 1.5V to 5.5V Capacitor-Adjustable Delay Active-High/-Low Enable Input Options Active-High/-Low Output Options Open-Drain (28V...

The DS1233M EconoReset uses a precision temperature-compensated reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an ...

The TS556 is a dual CMOS timer which offers a very low consumption: (Icc(TYP)TS556 = 220 μA at VCC = 5 V versus Icc(TYP) NE556(a)= 6 mA), and high frequency:(f(max.)TS556 = 2.7 MHz versus f(max.)NE...

CD4504B hex voltage level-shifter consists of six circuits which shift input signals from the VCC logic level to the VDD logic level. To shift TTL signals to CMOS logic levels, the SELECT input is ...

FTDI Chip USB To UART CableThe FTDI Chip USB to UART cable provides a fast and simple way to connect devices with a TTL level serial interface to a USB. Each cable contains a small internal electro...

The Renesas ICL32 series is a RS-232 transmitters/receivers with supply voltage Vcc Ranges from 3 to 5.5 volts. It is used in PDAs, notebook, and laptop computers where the low operational power co...

The DS1233D EconoReset uses a precision temperature-compensated reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an ...

The NCP12400 is a new fixed−frequency current−mode controller featuring the Dynamic Self−Supply. This function greatly simplifies the design of the auxiliary supply and the VCC capacitor by activat...