Ultimaker 3D Olsson Block Printing Parts & AccessoriessThe Ultimaker allows for quick and easy nozzle changes, so different nozzle sizes can be selected to suit each project. A larger nozzle is suitable for faster printing, while a smaller nozzle can be used to create more detailed prints. Note: Use of a torque wrench with the socket is not required but highly recommended to install nozzles without over-tightening. If a torque wrench is available for use with the socket during installation, please set it to a force between 1 and 1.5Nm. Take care not to set the force higher than 2Nm, as the nozzle could break off inside the block. Supplied with: Olsson block comes with 4 nozzles in various sizes (0.25mm, 0.40mm, 0.60mm and 0.80mm), a screwdriver and a socket.Features and BenefitsFilaments are available in different sizes and diameters and nozzles always need to be carefully selected Nozzles or dual nozzles are in constant operation and its wearing risk is increasedApplicationsHeated beds Motor extruders More information:  | | Product Type: | Olsson Block Kit | For Use With: | Ultimaker 2, Ultimaker 2+ | Nozzle Material: | Brass |
|