Greenlee Fibre Optic Test EquipmentThe Greenlee fibre optic test equipment has a maximum output power of 10dB. This test equipment can quickly identify the direction of the transmitted fibre and display the relative core power without interrupting the current service. This device detects modulations of 270 Hz, 1kHz and 2kHz with an audible tone and LED indication. It is supplied with an optical fibre identifier, set of adapter heads, AAA batteries x 2, instruction manual, soft carry bag and sun shield.Features and BenefitsRange of wavelength is between 800mm and 1700mm Non-intrusive low insertion loss prevents alarm conditions Easy operation as it identifies fibre with tone detection and a clear indication of signal transmission direction Offers versatility as it supports all the common fibres, including 250μm, 900μm, 2mm and 3mm and is able to sense light in bend insensitive fibresApplicationsMeasure and locate high-loss splices, connections and breaks Locate the end of a fibre Find potential sources of error caused by reflectance from dirty or poor connections Detect live optical signals before it begins testingCertificationsCE certified FCC certified WEEE certified More information: ![](/p.gif) | ![](/p.gif) | Cable Type: | Fibre Optic | Equipment Type: | Fibre Optic Test Kit | Wavelengths: | 1700nm | Maximum Power Measurement: | +10dBm | Battery Type: | AAA | Power Source: | Battery | Includes: | Optical Identifier, Set of Adapter Heads (0.25 mm, 0.9 mm, 2 mm, 3 mm), AAA Batteries (2), Instruction Manual, Soft Carry Bag, Sun Shield | Height: | 27mm | Length: | 196mm | Maximum Operating Temperature: | +60°C | Minimum Operating Temperature: | -10°C | Model Number (p): | FI100 | Weight: | 195g | Width: | 30.5mm |
|