The MIC59P50 parallel-input latched driver is a high-voltage (80V), high-current (500mA) integrated circuit comprised of eight CMOS data latches, a bipolar Darlington transistor driver for each latch, and CMOS control circuitry for the common CLEAR, STROBE, and OUTPUT ENABLE functions. Similar to the MIC5801, additional protection circuitry supplied on this device includes thermal shutdown, under voltage lockout (UVLO), and over-current shutdown.4.4 MHz Minimum Data Input Rate High-Voltage, High-Current Outputs Per-Output Over-Current Shutdown (500mA Typical) Undervoltage Lockout Thermal Shutdown Output Fault Flag 4.4 MHz Minimum Data Input Rate High-Voltage, High-Current Outputs Per-Output Over-Current Shutdown (500mA Typical) Undervoltage Lockout Thermal Shutdown Output Fault Flag Output Transient Protection Diodes CMOS-, PMOS-, NMOS-, and TTL-compatible Inputs Internal Pull-Down Resistors Low-Power CMOS Latches Single or Split Supply Operation More information:  | | Logic Family: | CMOS | Latch Mode: | Transparent | Latching Element: | SR Type | Number of Bits: | 8 | Number of Elements per Chip: | 22 | Number of Channels per Chip: | 1 | Output Type: | Open Collector | Polarity: | Non-Inverting | Mounting Type: | Surface Mount | Package Type: | SOIC | Pin Count: | 24 | Set/Reset: | Yes | Dimensions: | 15.42 x 7.52 x 2.26mm | Height: | 2.26mm | Length: | 15.42mm |
|