|  |
| |
| Item number:
2794E-1777006 Manufacturer no.:
1777006 EAN/GTIN:
5059045045601 |
| |
|
| | |
| Nail In Anchors are suitable for use in most solid base materials ranging from reinforced concrete, concrete blocks, brickwork and natural stone. They can also be used in some Hollow Materials depending on wall thickness and application, but their load capacity will be limited by the strength of the base material. Nail In anchors are all steel and are suitable for use where a higher degree of fire resistance is required.An all steel , hammer in fixings overing increased fire resistance. Suitable for use in concrete, masonry and some natural stone. Zinc plated and clear passivated min 5μm Through Fixing Large Flange Head Simple Hammer In Expansion Typical Applications Suspended Ceiling Hangers, Suspended CeilingTrim, Electrical Boxes, Conduit clips. Signs More information: | | Type: | Hammer In Anchor | Length: | 40mm | Fixing Hole Diameter: | 6mm | Maximum Fixing Thickness: | 20mm | Material: | Zinc Plated Steel |
|
| | |
| | | |
| Other search terms: Knock-in anchor, Knock-in anchors, Drive-in anchor, Drive-in anchors, Nain dowel, Nail dowels, Hammer-in plug, Hammer-in plugs, Hammer in fixing, Hammer in fixings, Knock-in nail plug, Knock-in nail plugs, drive-in anchor, 1777006, Fasteners & Fixings, Wall Plugs, Fixings & Anchors, Masonry Bolts & Anchors, RS PRO |
| | |
| |