INA Bearing Inserts 35mm ID 72mm OD GSH35-XL-2RSR-B / 1946928

Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present The outer ring of the bearings is to be located by means of easy-to-fit snap rings Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported Damping of running noise is required