Lascar Digital Voltmeter DC, LCD Display 3-Digits ±1 % / 3656252

Lascar Digital VoltmeterThe Lascar digital voltmeter is an easy to mount, LCD digital panel meter. It can be installed by drilling a single, 5.5mm hole into the panel. The module is fitted to a panel by locating its screw-threaded stud through the hole. Subsequently, the washer is added followed by tightening the nut provided along with it. The connection of the module passes through the hollow stud into the target applications. The module features a 4 to 25V measurement range with 100mV resolution and is powered from the signal it is measuring. Finally, a rubber seal is included, providing splashproof protection for the unit when fitted to the meter during installation. Its full-scale reading ranging between 4VDC to 25VDC and supply voltage ranging between 3VDC and 50VDC. Note: At voltages below 4VDC the LCD will display LO and go blank. At voltages above 25VDC, the LCD will display HI. Lascar, single hole fixing: LCD compact digital/virtual analogue indicators with common dimensions require a single 5.5mm diameter mounting hole unless specified otherwise. A rubber seal is included providing splash-proof protection for the units when fitted to the meter during installation. All the meters have an operating temperature range of 0°C to 50°C unless specified otherwise.Features and BenefitsSingle hole mounting LCD digit height is 12.5mm/0.5in Reverse polarity protection 2-wire operation Number of digits are 3.5 Operating temperature ranging between 0°C and 50°CCertificationsANSI/ESD S20.20:2014 BS EN 61340-5-1:2007