Electrotherm Digital Transducer / 9130848

EMC Emission and : EN 61326-1:2006 EN 61326-2-3:2006. LKM 264 Pt100/Pt1000 Digital Programmable Measuring Transducer. The LKM264 is a digital programmable measuring transducer for Resistance sensors with a 0 to 10 V current output. The LKM 264 transducer has been designed for installation on a 35-mm top hat rail. A PC and programming cable are used to specify sensor type, measuring range, and circuit type. Minor corrections can be carried out with the zero point controller. The sensor is connected with a 3-lead or 4-lead circuit. Input: Pt100 Pt1000 Ni100 Ni1000 resistor programmable Total measuring range: -200 to 850°C Pt100, -200 to 300°C Pt1000, -60 to 250°C Ni100/ (TK 5000/6180), -60 to 200°C Ni1000 (TK 5000/6180), 0 to 400, 0 to 2000 resistors Connection type: 2-/3-/4- wire circuit programmable Zero: programmable Span: programmable Measuring current: 0.25mA Current consumption: max.10mA Loop voltage: 15 to 35VDC, 15 to 26VAC polarity-safe Linearity error: 0.1%FS Resolution: 14 bit Linearisation accuracy: 0.1 K Measuring rate: 2/s Output: 0 to 10V other output voltages possible Probe break: 10V Short-circuit: 0V Clamping range: screw clamps 0.2 to 2.5mm² Temperature coefficient: 0.015 K/°C set temperature range, 0 to 100°C Operating temperature range: -25 to 70°C Mounting: 35mm DIN-rail Housing: Polycarbonate 75x25x53mm Weight: approx. 60g. Transducer LKM 264 Pt100 / Pt1000 Rail Assembly