Service MANOSKOP® torque wrench w.mount for shell tools No.730/80 160-800 N·m size of mount 24,5x28 mm

· click-type · the measuring element is only under load while force is being applied, no need for manual reset to zero · mount for interchangeable insert/shell tools · QuickRelease safety lock (sizes 5-65) · rapid setting thanks to easy-action locking lever in the handle (sizes 5-65) · ergonomically designed, non-slip adjuster with a thumb recess · magnifying glass integrated in the display window · optimised convex handle for strain-free working · dual stop signal · twin scales N·m/ft·lb and N·m/in·lb (sizes 5-80) · on request also available as an N·m-only version without twin scale (sizes 5-65) · can be applied for either clockwise or anticlockwise tightening by turning the inserts over · any force applied to the tool after the 'click' or applied in the opposite direction to the current function - e.g. forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it · calibration using perfectControl® calibrating unit No 7794 or calibration system No 7706. Readjustment does not require disassembly. · certificate in accordance with DIN EN ISO 6789-2:2017 · display deviation value ± 4% · use shell adaptor No 7370/80 to make 14 x 18 mm insert tools fit (max. 650 N·m) · supplied in textile bag