Withdrawal Sleeves are suitable for mounting bearings with a tapered bore on stepped shafts with a cylindrical seat. Since the bearing is usually supported against a shaft shoulder, the sleeve is pressed into the bore until the required bearing clearance is achieved. By screwing on a removal nut,the sleeve can be pulled out from under the bearing during dismantling Withdrawal sleeves AH(X) main dimensions according to DIN 5416 More information:  | | Catalogue part number: | G1515047912 | Inner diameter_mm: | 90 | Male thread: | M 105x2 | Width_mm: | 85 | Series: | AHX23 | Material: | Steel | Outer diameter_mm: | 95 | Weight_kg: | 0.89 |
|