HMT VersaDrive ImpactaTap 4 Piece Set M12,M16,M20,M24

15X FASTER THAN HAND TAPPING

VersaDrive ImpactaTaps perform best when adapted for use with an Impact wrench for Tapping through holes. However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench.



Fast Tapping with Minimal Kickback; Specially hardened for Impact Wrench use
Chipbreaker action for Automatic chip clearance when Impact Tapping
Unique Dual-Point Starting Angle for easy alignment and fast cut
High Grade Tool Steel with Ground Flutes for high accuracy & long life
GoldMax low-friction Titanium coating to stop heat burn out
High Strength, Non-slip Shank Design

Product CodeDescriptionSizeImpact Torque RatingBased on Material Thickness of:
308010-0050VersaDrive ImpactaTapM5 x 0.80mm200 Nm20mm
308010-0060VersaDrive ImpactaTapM6 x 1.0mm240 Nm20mm
308010-0080VersaDrive ImpactaTapM8 x 1.25mm280 Nm20mm
308010-0100VersaDrive ImpactaTapM10 x 1.50mm300 Nm20mm
308010-0120VersaDrive ImpactaTapM12 x 1.75mm320 Nm20mm
308010-0160VersaDrive ImpactaTapM16 x 2.00mm360 Nm20mm
308010-0200VersaDrive ImpactaTapM20 x 2.50mm400 Nm20mm
308010-0240VersaDrive ImpactaTapM24 x 3.00mm600 Nm20mm
308020-0050VersaDrive ImpactaTap for Galv BoltsM5 x 0.80mm200 Nm20mm
308020-0060VersaDrive ImpactaTap for Galv BoltsM6 x 1.0mm240 Nm20mm
308020-0080VersaDrive ImpactaTap for Galv BoltsM8 x 1.25mm280 Nm20mm
308020-0100VersaDrive ImpactaTap for Galv BoltsM10 x 1.50mm300 Nm20mm
308020-0120VersaDrive ImpactaTap for Galv BoltsM12 x 1.75mm320 Nm20mm
308020-0160VersaDrive ImpactaTap for Galv BoltsM16 x 2.00mm360 Nm20mm
308020-0200VersaDrive ImpactaTap for Galv BoltsM20 x 2.50mm400 Nm20mm
308020-0240VersaDrive ImpactaTap for Galv BoltsM24 x 3.00mm600 Nm20mm