D-Link DMS 3130-30PS - Switch - multi-gigabit - L3 - Managed - 16 x 100/1000/2.5G (PoE+) + 8 x 100/1000/2.5G/5G (PoE++) + 2 x 100/1000/2.5G/5G/10GBase-T + 4 x 10 Gigabit / 25 Gigabit SFP28 - rack-mountable - PoE++ (740 W) More information: General | Features | Flow control, VLAN support, DoS attack prevention, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, WRED, sFlow, STP support, ACL support, QoS, DAI, RSPAN, CoS, D-Link SIM, metal housing, ERPS, 6KV Surge protection, LD-VCStack, Link Aggregation, DDM, AAA, VLAN Double Tagging (Q-in-Q), Root Guard, Loop Guard, ERPS v2, flow mirroring, VLAN mirroring, WDRR, WAC, Voice VLAN, CFM, IPMB, RA guard, EEE, BPDU Filter, WRR, HOL Blocking Prevention, loopback detection, D-Link DDP, Asymmetric VLAN, Microsoft NLB, Smart Fans, DAD, DNS support, Auto Surveillance VLAN, Super VLAN |  | Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1v, IEEE 802.1ag, IEEE 802.3at, IEEE 802.1AX, IEEE 802.3bt | | Device Type | Switch - 30 ports - L3 - Managed - stackable | | Enclosure Type | Rack-mountable | | Built-in Devices | 2 x fans | | Status Indicators | Power, RPS (Redundant Power Supply), USB, console, link/activity/speed, management, fan failure, stack ID | | Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI, OAM, SMTP, NTP, DHCP, IPv4, IPv6 | | Capacity | Packet buffer size: 4 MB ¦ Units per virtual stack: 32 ¦ Queues per port: 8 ¦ Link aggregation groups: 32 ¦ IGMP groups: 1024 ¦ MLD groups: 1024 ¦ VLAN groups: 4094 ¦ ACL entries (ingress): 3072 ¦ ACL entries (egress): 1024 ¦ IPv4 routes (ARP entries): 2048 ¦ IPv6 ND entries: 1024 ¦ IP interfaces: 128 ¦ IPv4 routing table entries: 1000 ¦ IPv6 routing table entries: 512 ¦ IPv4 forwarding table entries: 4000 ¦ IPv6 forwarding table entries: 2000 | | MAC Address Table Size | 32768 entries | | Encryption Algorithm | SSL, TLS 1.0, SSL 3.0, SSL 2.0, TLS 1.1, TLS 1.2 | | Routing Protocol | RIP-1, RIP-2, IGMPv2, IGMP, OSPFv2, PIM-SM, static IP routing, IGMPv3, OSPFv3, ECMP, RIPng, MLDv2, MLD, VRRPv2, VRRPv3, MSTP, RSTP, STP | | Authentication Method | RADIUS, TACACS+ | | Performance | Switching capacity: 400 Gbps ¦ Bidirectional forwarding rate (64-byte packet size): 298 Mpps ¦ Stacking bandwidth: 200 Gbps | | Max Units In A Stack | 9 | | Power Over Ethernet (PoE) | PoE++ | | Ports | 16 x 100/1000/2.5G (PoE+) + 8 x 100/1000/2.5G/5G (PoE++) + 2 x 100/1000/2.5G/5G/10GBase-T + 4 x 10 Gigabit / 25 Gigabit SFP28 | | Jumbo Frame Support | 9KB | | PoE Budget | 740 W | | Subtype | 5 Gigabit Ethernet / 2.5 Gigabit Ethernet | Expansion / Connectivity | Interfaces | 16 x 100/1000/2.5G RJ-45 PoE+ ¦ 8 x 100/1000/2.5G/5G RJ-45 PoE++ - 60 W ¦ 2 x 100/1000/2.5G/5G/10G RJ-45 uplink ¦ 4 x 10Gbit/25Gbit SFP28 uplink ¦ 1 x console RJ-45 ¦ 1 x management (Gigabit LAN) RJ-45 ¦ 1 x USB 2.0 Type A | Manufacturer Warranty | Service & Support | Limited warranty - lifetime | Miscellaneous | Compliant Standards | FCC Class A certified, BSMI, cUL, CB, IC, VCCI Class A, RCM | | Localisation | Europe | | MTBF | 277,222.63 hours | Power | Power Device | Internal power supply - hot-plug | | Voltage Required | AC 100-240 V (50/60 Hz) | | Installed Qty | 1 | | Max Supported Qty | 2 | | Power Redundancy | Optional | | Power Redundancy Scheme | 1+1 | | Power Consumption Stand by | 58.3 Watt | Environmental Parameters | Min Operating Temperature | 0 °C | | Max Operating Temperature | 50 °C | | Humidity Range Operating | 10 - 90% RH | | Min Storage Temperature | -40 °C | | Max Storage Temperature | 70 °C | | Humidity Range Storage | 5 - 90% RH | Dimensions & Weight | Width | 44 cm | | Depth | 47 cm | | Height | 4.4 cm | | Weight | 6.54 kg |
|