Cisco Meraki Catalyst 9300-48U - Switch - L3 - Managed - 48 x 10/100/1000 (UPOE) - rack-mountable - UPOE (822 W) More information: General | Features | VLAN support, port mirroring, Broadcast Storm Control, firmware upgradable, PVST, DHCP snooping, ACL support, QoS, DHCP server, DAI, STP Root Guard, UDLD, DHCP relay, Cisco StackPower technology, hot swappable 3 fans, network diagnostics, RBAC, push notification, STP BPDU Guard, STP loop guard, ZTP, DSCP to CoS Mutation, PIM, MAB, VLAN trunking, CDP, RPVST, sticky MAC, adaptive policy, usage statistics | | Compliant Standards | IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3bt | | Device Type | Switch - 48 ports - L3 - Managed - stackable | | Enclosure Type | Rack-mountable 1U | | Built-in Devices | 3 x fans | | Status Indicators | Status | | Remote Management Protocol | SNMP, DHCP, IPv4, IPv6, Syslog | | Capacity | QoS queues: 8 ¦ Member ports per aggregated link: up to 8 ¦ VLANs with trunking: 4094 | | MAC Address Table Size | 32000 entries | | Routing Protocol | IGMP, VRRP, OSPFv2, static IP routing, MSTP, RSTP, STP | | Authentication Method | RADIUS | | Performance | Switching capacity: 256 Gbps ¦ Stacking bandwidth: 480 Gbps ¦ Forwarding rate: 190.48 Mpps | | Max Units In A Stack | 8 | | Power Over Ethernet (PoE) | UPOE | | Ports | 48 x 10/100/1000 (UPOE) | | PoE Budget | 822 W | | Subtype | Gigabit Ethernet | Expansion / Connectivity | Interfaces | 48 x 1000Base-T RJ-45 UPOE - 60 W ¦ 2 x network stack device ¦ 1 x management ¦ 1 x USB Type A ¦ 1 x USB Type B console | | Expansion Slots | 1 (total) / 1 (free) x Expansion Slot | Manufacturer Warranty | Service & Support | Limited warranty - advanced replacement - lifetime - response time: next business day | Miscellaneous | Compliant Standards | CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, ICES-003 Class A, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, CNS 13438, EN 300 386 V1.6.1, EN 55022 Class A, KN32, KN35, EN 55032, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, TCVN 7189 Class A, TCVN 7317, AN/NZS 60950.1, V-2/2015.04, V-3/2015.04, FCC CFR 47 Part 15 Class A, VCCI-CISPR 32 Class A | | Rack Mounting Kit | Included | | MTBF | 227,410 hours | Power | Power Device | Internal power supply - hot-plug | | Voltage Required | AC 100-240 V (50 - 60 Hz) | | Installed Qty | 1 | | Max Supported Qty | 2 | | Power Provided | 1100 Watt | | Power Redundancy | Optional | | 80 PLUS Certification | 80 PLUS Platinum | Environmental Parameters | Min Operating Temperature | -5 °C | | Max Operating Temperature | 45 °C | | Humidity Range Operating | 5 - 90% | | Min Storage Temperature | -20 °C | | Max Storage Temperature | 70 °C | Dimensions & Weight | Width | 44.5 cm | | Depth | 48.8 cm | | Height | 4.4 cm | | Weight | 7.72 kg |
|