Cisco Catalyst 9300X - Network Essentials - switch - L3 - Managed - 8 x 100/1000/2.5G/5G/10GBase-T (UPOE+) + 40 x 100/1000/2.5G/5GBase-T (UPOE+) - rack-mountable - UPOE+ More information: General | Features | VPN support, full duplex mode, NSF, QoS, Cisco StackWise Technology, Rapid PVST+, SRR, LACP support, RSPAN, FNF, 802.1x authentication, DSCP support, VPLS, CoPP, EVPN, Blue Beacon LED, IPSec support, ZTP, EEE, SPAN, PIM, FHS, PVLAN support, GIR mode, NBAR 2, CIR, Cisco UADP 2.0, CDP, BSR Mechanism, mDNS, SUDI, Preboot Execution Environment, Cisco StackWise-1T technology | ![](/p.gif) | Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3an, IEEE 802.3at, IEEE 1588v2, IEEE 802.1BA, IEEE 802.3bz | ![](/p.gif) | Device Type | Switch - 48 ports - L3 - Managed - stackable | ![](/p.gif) | Enclosure Type | Rack-mountable | ![](/p.gif) | Built-in Devices | RFID tag | ![](/p.gif) | Status Indicators | Status | ![](/p.gif) | Remote Management Protocol | SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, HTTP, CLI, NETCONF, RESTCONF, gRPC, YANG | ![](/p.gif) | RAM | 16 GB | ![](/p.gif) | Capacity | IPv4 routing table entries: 39000 ¦ Multicast routes: 8000 ¦ QoS scale entries: 4000 ¦ ACL scale entries: 8000 ¦ IPv6 routing table entries: 19500 ¦ Packet buffer size: 16 MB ¦ FNF entries: 64000 ¦ VLAN IDs: 4094 ¦ Switched virtual interfaces (SVIs): 1000 | ![](/p.gif) | Flash Memory | 16 GB | ![](/p.gif) | MAC Address Table Size | 32000 entries | ![](/p.gif) | Encryption Algorithm | 128-bit AES, 256-bit AES | ![](/p.gif) | Routing Protocol | RIP, BGP-4, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, static IP routing, GRE, OSPFv3, PIM-SSM, Bidirectional PIM, MSDP, policy-based routing (PBR), RIPng, MPLS, BGP for IPv6, MSTP, STP, IS-ISv4 | ![](/p.gif) | Performance | Switching capacity: 2000 Gbps ¦ Switching capacity with stacking: 3000 Gbps ¦ Forwarding rate: 1488 Mpps ¦ Forwarding rate with stacking: 2232 Mpps | ![](/p.gif) | Max Units In A Stack | 8 | ![](/p.gif) | Power Over Ethernet (PoE) | UPOE+ | ![](/p.gif) | Ports | 8 x 100/1000/2.5G/5G/10GBase-T (UPOE+) + 40 x 100/1000/2.5G/5GBase-T (UPOE+) | ![](/p.gif) | Jumbo Frame Support | 9198 bytes | ![](/p.gif) | Subtype | 10 Gigabit Ethernet | Expansion / Connectivity | Interfaces | 8 x 100/1000/2.5G/5G/10GBase-T RJ-45 UPOE+ - 90 W ¦ 40 x 100/1000/2.5G/5GBase-T RJ-45 UPOE+ - 90 W ¦ 1 x USB 2.0 | ![](/p.gif) | Expansion Slots | 1 (total) / 1 (free) x Expansion Slot | Manufacturer Warranty | Service & Support | Limited warranty - replacement - lifetime - response time: next business day ¦ Technical support - consulting - 90 days | Miscellaneous | Compliant Standards | EN 61000-3-2, EN 61000-3-3, AS/NZS 60950-1, ICES-003 Class A, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, CNS 13438, EN 300 386 V1.6.1, EN 300 386, KN32, KN35, EN 55032 Class A, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, TCVN 7189 Class A, V-3 Class A, TCVN 7317, EN 55035, CISPR 35, V-2/2015.04, V-3/2015.04 | ![](/p.gif) | MTBF | 188,200 hours | Power | Power Device | Internal power supply - hot-plug | ![](/p.gif) | Voltage Required | AC 115-240 V (50 - 60 Hz) | ![](/p.gif) | Installed Qty | 1 | ![](/p.gif) | Max Supported Qty | 2 | ![](/p.gif) | Power Provided | 1100 Watt | ![](/p.gif) | Power Redundancy | Optional | ![](/p.gif) | 80 PLUS Certification | 80 PLUS Platinum | Environmental Parameters | Min Operating Temperature | -5 °C | ![](/p.gif) | Max Operating Temperature | 45 °C | ![](/p.gif) | Humidity Range Operating | 5 - 90% (non-condensing) | ![](/p.gif) | Min Storage Temperature | -40 °C | ![](/p.gif) | Max Storage Temperature | 70 °C | ![](/p.gif) | Humidity Range Storage | 5 - 90% (non-condensing) | Dimensions & Weight | Width | 44.5 cm | ![](/p.gif) | Depth | 52.4 cm | ![](/p.gif) | Height | 4.4 cm | ![](/p.gif) | Weight | 6.44 kg |
|