Cisco Meraki Catalyst 9300L-48T-4X - Switch - L3 - Managed - 48 x 1000Base-T + 4 x 1/10 Gigabit (uplink) - rack-mountable - AC More information: General | Features | VLAN support, IGMP snooping, port mirroring, Broadcast Storm Control, firmware upgradable, DHCP snooping, ACL support, QoS, DHCP server, DAI, UDLD, DHCP relay, Port Security, Multicast filtering function, 802.1x authentication, 3 fans, RBAC, push notification, Root Guard, Loop Guard, ZTP, MAB, BPDU Guard, VLAN trunking, CDP, Multicast routing, DSCP to CoS mapping |  | Compliant Standards | IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP) | | Device Type | Switch - 48 ports - L3 - Managed - stackable | | Enclosure Type | Rack-mountable 1U | | Status Indicators | Status | | Remote Management Protocol | SNMP, DHCP, Syslog | | Capacity | Priority queues: 8 ¦ Maximum number of VLANs: 4094 ¦ Active VLANs: 1000 ¦ Link aggregation ports: 8 | | MAC Address Table Size | 32000 entries | | Routing Protocol | VRRP, OSPFv2, static IP routing, STP | | Authentication Method | RADIUS | | Performance | Switching capacity: 176 Gbps ¦ Forwarding rate: 130.95 Mpps ¦ Forwarding rate with stacking: 369.05 Mpps ¦ Stacking bandwidth: 496 Gbps | | Max Units In A Stack | 8 | | Ports | 48 x 1000Base-T + 4 x 1/10 Gigabit (uplink) | | Subtype | Gigabit Ethernet | Expansion / Connectivity | Interfaces | 48 x 1000Base-T RJ-45 ¦ 4 x 1/10GBase-X SFP+ uplink ¦ 2 x network stack device ¦ 1 x management | Manufacturer Warranty | Service & Support | Limited warranty - lifetime | Miscellaneous | Compliant Standards | CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, AS/NZS 60950-1, ICES-003 Class A, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, CNS 13438, EN 300 386 V1.6.1, EN 55022 Class A, KN32, KN35, EN 55032, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, TCVN 7189 Class A, TCVN 7317, V-2/2015.04, V-3/2015.04, FCC CFR 47 Part 15 Class A, VCCI-CISPR 32 Class A | | Rack Mounting Kit | Included | | MTBF | 380,080 hours | Power | Power Device | Internal power supply - hot-plug | | Voltage Required | AC | | Installed Qty | 1 | | Max Supported Qty | 2 | | Power Provided | 350 Watt | | Power Redundancy | Yes | | Power Consumption Stand by | 60.97 Watt | Environmental Parameters | Min Operating Temperature | -5 °C | | Max Operating Temperature | 45 °C | | Humidity Range Operating | 5 - 90% | Dimensions & Weight | Width | 44.5 cm | | Depth | 44.9 cm | | Height | 4.4 cm | | Weight | 7 kg |
|