Wall Mounting Cabinet Unique Series - 600x450 mm (WxD) purchased inexpensively from Mercateo

Wall Mounting Cabinet Unique Series - 600x450 mm (WxD)

The DIGITUS® Unique Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany

Benefits:

Robust steel construction for sturdy wall mounting
Lockable safety-glass door with steel frame
Side panels are lockable and removable

The network cabinets for wall installation from the Unique series were developed for especially convenient and flexible network cabling. There is a sliding cable inlet with foam rubber seal in the roof of each cabinet. The back wall and floor plate are equipped with pre-cut cable inlets with a plastic cover. To accommodate a fan module, the roof structure is also equipped with a pre-cut area. Two pair of galvanized 483 mm (19”) profile rails labeled with rack units readable in both directions are installed on the inside. Their depth can be adjusted. Each cabinet is made of up to 1.5 mm thick sheet steel. Coloring is done with electrostatic powder coating in the standard colors gray (RAL 7035) or jet black (RAL 9005). Removable and lockable side walls in a modular design as well as lockable and removable front door improve accessibility. The door hinges can be switched. Wall installation is accomplished in two easy work steps: The housing frame plate is bolted on the wall and then connected with the housing. With optionally available levelling feet or casters, the wall housings from the Unique series can also be used as a free-standing unit.

Technical data:

Safety class rating IP20
Lockable safety-glass door with steel frame
210° door opening angle
1-point-locking-mechanism on the front door
Side panels are lockable and removable
483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized
483 mm (19“) profile rails are adjustable in depth and with height unit marking
Max. installation depth: 370 mm
Cable entry on the rear side and base with plastic cover and top with sliding cover
Roof is prepared for fan units (punched out entries)
Ventilation slots for active and passive ventilation and exhausting
Several earthing points for rack components
Incl. installation set (screws, cage nuts, washers)
Rack is completely mounted
Equipment mounting depth min.-max.: 305-370 mm
Cabinet type: Wall mounting cabinet
Color: light grey, RAL 7035
Depth: 450 mm
Front door: Glass door, single opening
Load capacity: 100 kg
Side panels: Both sides
Units: 16
Width: 600 mm
IP protection class: IP20
Mounted: true