The GVT-2003 SMF ST media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100/1000Base-T RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T, 100Base-TX and 1000Base-T auto-sensing. Used in single-mode with fibre-optic cabling, this can extend a network range up to 20km. The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP (Link Fault Pass-through), allowing the converter to monitor both the fiber and copper ports for signal loss, as well as cut through and smart pass through mode. The GVT-2003 is able to operate in temperatures from -10° up to 55° Celsius. The converter can be used as a standalone unit or as a slide-in module to the CHV-2000 19” converter rack, which can accommodate up to 14 units for use in a central wiring closet.
More information: Packaging data | Package width | 235 mm | ![](/p.gif) | Package depth | 120 mm | ![](/p.gif) | Package height | 55 mm | ![](/p.gif) | Package weight | 840 g | Design | LED indicators | Link, Power | ![](/p.gif) | Product colour | Black | ![](/p.gif) | Country of origin | China | Operational conditions | Operating temperature (T-T) | -10 - 55 °C | ![](/p.gif) | Storage temperature (T-T) | -40 - 70 °C | ![](/p.gif) | Operating relative humidity (H-H) | 5 - 90 % | ![](/p.gif) | Storage relative humidity (H-H) | 5 - 90 % | Power | Power consumption (typical) | 5 W | Performance | Maximum transfer distance | 20000 m | ![](/p.gif) | Wavelength | 1310 nm | ![](/p.gif) | Fiber mode structure | Single-mode | Ports & interfaces | Fiber optic connector | ST | ![](/p.gif) | Connectivity technology | Wired | ![](/p.gif) | Ethernet LAN (RJ-45) ports | 1 | ![](/p.gif) | DC-in jack | Yes | Logistics data | Master (outer) cases per pallet (air) | 16 pc(s) | ![](/p.gif) | Master (outer) case width | 360 mm | ![](/p.gif) | Master (outer) case height | 480 mm | Weight & dimensions | Width | 71 mm | ![](/p.gif) | Depth | 94 mm | ![](/p.gif) | Height | 26 mm | ![](/p.gif) | Weight | 200 g | Technical details | Compliance certificates | CE | ![](/p.gif) | Sustainability compliance | Yes | Network | Maximum data transfer rate | 1000 Mbit/s | ![](/p.gif) | Converter input interface | 1000Base-LX, 1000Base-SX | ![](/p.gif) | Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z | ![](/p.gif) | Ethernet interface type | Fast Ethernet, Gigabit Ethernet | ![](/p.gif) | Ethernet LAN data rates | 10,100,1000 Mbit/s | ![](/p.gif) | Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T | ![](/p.gif) | Jumbo frames support | Yes | ![](/p.gif) | Jumbo frames | 9000 | ![](/p.gif) | Flow control support | Yes | ![](/p.gif) | Duplex system | Full, Half | ![](/p.gif) | Link Loss Carry Forward (LLCF) supported | Yes | ![](/p.gif) | Link Loss Return (LLR) supported | Yes | ![](/p.gif) | Link Fault Pass-through (LFP) | Yes | Packaging content | AC adapter included | Yes | ![](/p.gif) | Quick installation guide | Yes |
|