The SGFEB provides a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment. Deploying fiber into today’s networks provides the ability to transmit data over significantly longer distances than is possible on copper. Fiber also protects your data from external sources of noise and interference, improving network performance.
Operating at Layer 2, this converter not only converts copper to fiber, it also does Rate conversion, converting 10/100/1000 copper to 1000Base fiber. More information: Design | LED indicators | Yes | | Product colour | Black | | Certification | EN55022, EN55024, UL60950 | Operational conditions | Operating temperature (T-T) | 0 - 50 °C | | Storage temperature (T-T) | -15 - 65 °C | | Operating relative humidity (H-H) | 5 - 95 % | Power | Input voltage | 24 V | | Power consumption (typical) | 2.2 W | Performance | Maximum transfer distance | 550 m | | Wavelength | 850 nm | | Fiber mode structure | Multi-mode | Ports & interfaces | Fiber optic connector | SC | | Connectivity technology | Wired | | Ethernet LAN (RJ-45) ports | 1 | | DC-in jack | Yes | Weight & dimensions | Width | 82.55 mm | | Depth | 121.92 mm | | Height | 25 mm | | Weight | 900 g | Network | Maximum data transfer rate | 1000 Mbit/s | | Converter input interface | 10Base-T, 100Base-T, 1000Base-T | | Converter output interface | 1000Base-SX | | Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3z | | Ethernet interface type | Gigabit Ethernet | | Ethernet LAN data rates | 10,100,1000 Mbit/s | | Jumbo frames support | Yes | | Jumbo frames | 10260 |
|