Designed to convert 10BASE-T/100BASE-TX copper to 100Base-FX fiber media and vice versa, the DMC-300SC offers conversion from fiber to copper to minimize cost and extend hauls.
The DMC-300SC by D-Link® is a media converter designed to connect 10BASE-T/100BASE-TX copper to 100Base-FX fiber media and vice versa. Based on the IEEE 802.3 and 802.3u standards, the DMC-300SC is designed for use with multimode fiber cable utilizing the SC-Type connector. The DMC-300SC supports shortwave (SX) laser specifications at a full wire-speed forwarding rate. Other features of this module include the ability to be used as a standalone device (no chassis required), Auto MDI/MDI-X, Auto negotiation of speeds and duplex modes on twisted-pair port, and front panel status LEDs. The DMC-300SC will transmit at extended More information: Packaging data | Package width | 208 mm |  | Package depth | 274 mm | | Package height | 68 mm | | Package weight | 769 g | Other features | Dimensions (WxDxH) | 89 x 119 x 25 mm | | Interface | RJ-45, SC | | Power requirements | 7.5V, 1.5A | | Full duplex | Yes | | Cable type | UTP Cat. 3, 4, 5; 62.5/125μm MM Fiber; 10/125μm SM Fiber | Operational conditions | Operating temperature (T-T) | 0 - 40 °C | | Storage temperature (T-T) | -25 - 70 °C | | Operating relative humidity (H-H) | 10 - 90 % | Power | Power consumption (typical) | 7.2 W | Logistics data | Shipping (inner) case length | 370 mm | | Shipping (inner) case width | 291 mm | | Shipping (inner) case height | 452 mm | | Master (outer) cases per pallet (air) | 44 pc(s) | | Master (outer) cases per pallet (sea) | 44 pc(s) | | Shipping (inner) case gross weight | 8386 g | | Harmonized System (HS) code | 85176990 | Weight & dimensions | Weight | 300 g | Network | Cabling technology | 10Base-T, 100BASE-T, 100Base-FX |
|