EXSYS EX-6011 digital/analogue I/O module

The EX-6011 8-line Digital I/O to Ethernet Adapter is designed to adopt your digital I/O lines remotely on your Ethernet (Internet). It delivers simple, reliable and costeffective
network connectivity for your digital I/O applications such as home or industrial factory automation, digital I/O control from any networked PC, alarm and power monitoring by network or Internet, PC controlled machines, distributed machine I/O, remote lighting and power control etc.
The unique I/O Extender mode provides an easy solution for extending discrete digital I/O lines over IP. It provides sensing of ON/OFF conditions and control of devices from a remote location. With 2 adapters set in master and slave modes respectively, one of the adapter transfers the states of its 4 digital input line states to the other adapter over Ethernet or Internet. The other adapter will receive the 4 states and output to its 4 digital output lines. It does not involve any driver or operating system support. It’s very simple and straightforward.
A built-in watch dog function is designed to reset the EX-6011 when the hardware hangs because some other unknown causes. The EX-6011 is easy to install or remotely
through a variety IP addressing methods (UDP, IP, TCP, ICMP, HTTP, DHCP, ARP-Ping). It is ideal for applications requiring digital I/O lines and network controlled management.

- Provide 4 Digital Input and 4 Output Lines
- 2 Non-inverted and 2 Inverted Output Lines
- ESD and Surge Protection for all I/O Lines
- I/O Line Voltage is Compatible with CMOS/TTL
- 10-Pin Terminal Blocks
- Provides one 10/100Mbps RJ45 LAN Port
- Supports Setup and Connect Passwords
- Supports Standard Windows Socket Protocol
- Provides TCP Server, TCP Client and I/O Extender Modes
- Powered +5VDC by DC Jack or Terminal Blocks
- Provides both Wall Mounting and DIN-Rail Kits
- Support Virtual COM Port Drivers