| |
|
| Item number: CIEN4-36231284 Manufacturer no.: 4XB0K12354 EAN/GTIN: 0191200315510 |
| |
|
| | |
| Enterprise Entry SSDs and Enterprise SSDs have similar read and write IOPS performance, but the key difference between them is their endurance (or lifetime) (that is, how long they can perform write operations because SSDs have a finite number of program/erase (P/E) cycles). Enterprise Entry SSDs have a better cost/IOPS ratio but lower endurance compared to Enterprise SSDs. SSD write endurance is typically measured by the number of program/erase (P/E) cycles that the drive incurs over its lifetime, listed as the total bytes of written data (TBW) in the device specification.
The TBW value assigned to a solid-state device is the total bytes of written data (based on the number of P/E cycles) that a drive can be guaranteed to complete (% of remaining P/E cycles = % of remaining TBW). Reaching this limit does not cause the drive to immediately fail. It simply denotes the maximum number of writes that can be guaranteed. A solid-state device will not fail upon reaching the specified TBW. At some point based on manufacturing variance margin, after surpassing the TBW value, the drive will reach the end-of-life point, at which the drive will go into a read-only mode.
Because of such behavior by Enterprise Entry solid-state drives, careful planning must be done to use them only in read-intensive or mixed up to 70% read/30% write environments to ensure that the TBW of the drive will not be exceeded before the required life expectancy.
For example, the 480 GB PM863a drive has an endurance of 683 TB of total bytes written (TBW). This means that for full operation over five years, write workload must be limited to no more than 374 GB of writes per day, which is equivalent to 0.8 full drive writes per day (DWPD). For the device to last three years, the drive write workload must be limited to no more than 624 GB of writes per day, which is equivalent to 1.3 full drive writes per day. More information: Operational conditions | Operating temperature (T-T) | 0 - 70 °C | | Operating relative humidity (H-H) | 8 - 85 % | | Operating shock | 1500 G | | Maximum operating altitude | 3050 m | Power | Power consumption (read) | 3 W | | Power consumption (write) | 3 W | Features | SSD form factor | 2.5" | | SSD capacity | 240 GB | | Interface | Serial ATA III | | Memory type | V-NAND | | Component for | Server/workstation | | Read latency | 130 µs | | Write latency | 30 µs | | ECC | Yes | | Mean time between failures (MTBF) | 2000000 h | | Certification | UL<br /> TUV<br /> FCC<br /> CE Mark<br /> C-Tick Mark<br /> BSMI (Taiwan)<br /> KCC (Korea EMI) | Weight & dimensions | Width | 70 mm | | Depth | 100 mm | | Height | 7 mm | | Weight | 60 g |
|
| | |
| | | |
| Other search terms: HDD mounting frame, HDD mounting frames, Internal hard drive, Internal hard disk, Internal HDD, Internal hard drives, Internal hard disks, Internal SSD, Internal SSDs, Internal Solid State Drive, Internal Solid State Drives, Notebook hard drive, Laptop HDD, Notebook hard disk drive, Notebook hard disk, Notebook fixed disk, Notebook HDD, SSD, SSDs, Solid-state drive, Solid-state drives, Solid-state disk, Solid-state disks, SSD drive, SSD disk, Solid State Disk, Solid State Disks, Solid State Drive, Solid State Drives, internal hard drive, internal SSD, internal SSDs, internal solid-state disk, internal solid-state disks |
| | |
| |